Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior/Exterior Multi-Surface Primer & Sealer No. 436

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 57ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

PREMIUM PLUS® Interior/Exterior Multi-Surface Primer & Sealer No. 436

For a versatile primer that’s excellent for stain-blocking, adhesion and sealing interior and exterior surfaces, choose BEHR PREMIUM PLUS Interior/Exterior Multi-Surface Primer & Sealer. This 100% styrene acrylic formula resists medium to heavy stains, and can even be used on metal, aluminum and to cover old oil-based paint. It’s also tintable, so it’s great when you’re looking to make a color change. This is also a low odor, low VOC formula.

 

GREENGUARD Certified
Finish
Dries to a non-reflective sheen which minimizes the appearance of minor surface imperfections.
Where to Use
Over properly prepared uncoated and previously painted interior/exterior surfaces
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR ®..

START NOW »

Tools & Resources

Where to Use

Over properly prepared uncoated and previously painted Exterior surfaces. Ideal for Masonry, Stucco, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete and on glossy surfaces or oil-based paint.

Usage Summary

30 Min Dries to Touch
1 HR Ready to Topcoat

250-400 Sq. Ft 
Coverage per Gallon

Soap & Water
Clean-Up

Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
  • Etch galvanized metal with a product containing muriatic acid.
  • Allow masonry/concrete surface to cure for 30 days before applying.
  • All masonry surfaces must have a pH of 13.0 or less prior to coating.

Application†

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Stir primer occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Two coats may be needed over stains and woods that contain tannins.
  • Spot prime patched areas first, follow with a complete primer coat. Topcoat within 30 days.
  • Bright or deep colors require a tinted primer.
  • Have primer tinted close to topcoat color with no more than 4 ounces of colorant per gallon.
    † On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

 

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).