Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Exterior Semi-Gloss Enamel

PREMIUM PLUS® Exterior Semi-Gloss Enamel

Add a touch of class and character to your home's exterior accents with BEHR PREMIUM PLUS® Exterior Semi-Gloss Enamel paint. This radiant sheen creates a sleek appearance, with a durable finish that's formulated to withstand wear. It's ideal for trim, doors and windows, but it's also great for shutters and outdoor furniture.

Finish
A Semi-gloss paint sheen is a  sleek, radiant sheen that creates a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Where to Use
Doors, trim and shutters; Exterior furniture
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Buy Online

Paint samples, gallons, and five gallons are available online.

Buy Online »

Where to Use

Ideal for Wood, Vinyl, Doors, Windows, Trim, Shutters, Garage Doors and Outdoor Furniture.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • Use on previously painted or primed Exterior surfaces. All surfaces should be properly prepared and cleaned.
  • Remove loose paint and chalk. Wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Etch galvanized metal and rinse thoroughly.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • Use a product such as BEHR PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436.
  • For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer.
  • For best results, prime all metal surfaces before painting.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C). Stir paint occasionally.
  • Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • Darker colors may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time. After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, color choice must be the same color or lighter than the existing color.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like