Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint

BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint

Beautify and protect your home's interior and exterior concrete surfaces with  BEHR PREMIUM 1-Part Epoxy Concrete and Garage Floor Paint. This water-based paint can protect against hot-tire pick-up, automotive fluids and most household chemicals. This epoxy paint will provide a beautiful protective finish on driveways, garage floors, pool decks, walkways and interior concrete surfaces.


Click Here to see available colors.

Finish
Satin finish
Where to Use
Interior & Exterior concrete and masonry surfaces
Coverage
Rough Surface: 300-400 Sq. Ft. Per Gallon ; Smooth: 400-500 Sq. Ft.

Latest Featured Reviews

FOR VERTICAL SURFACES, USE BEHR PREMIUM SOLID COLOR OR SEMI-TRANSPARENT CONCRETE STAIN.

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Interior or Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Basements and Porches.DO NOT use on vertical surfaces or areas subject to hydrostatic pressure. NOT for industrial use. DO NOT use on areas subject to fork-lifts.

Usage Summary

Rough Surface
300-400 Sq. Ft
Smooth Surface
400-500 Sq. Ft.
1 HR
Dry To Touch
4-6 HR
Recoat Time
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

New and Uncoated Concrete or Masonry Surfaces:

  • New concrete must cure for a minimum of 30 days.
  • For proper penetration and adhesion of topcoat, use a product such as BEHR PREMIUM CONCRETE & MASONRY CLEANER & ETCHER NO. 991 to clean and etch the surface. Follow all label instructions.
  • Apply a product such as BEHR PREMIUM CONCRETE & MASONRY BONDING PRIMER NO. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Painted, Stained or Sealed Concrete:

  • Option 1- To completely strip the entire surface, use a product such as BEHR PREMIUM Concrete & Masonry Paint Striper NO. 992. Follow all label instructions.
  • Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
  • Use a product such as BEHR PREMIUM CONCRETE & MASONRY DEGREASER & CLEANER NO. 990 to clean previously coated surfaces in sound condition.
  • Use a product such as BEHR PREMIUM CONCRETE & MASONRY CLEANER & ETCHER NO. 991 to clean and etch any bare concrete area. Follow all label instructions.
  • Spot prime all bare concrete areas with a product such as BEHR PREMIUM CONCRETE & MASONRY BONDING PRIMER NO. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Application

  • DO NOT THIN. Intermix all cans of same product to ensure color uniformity. Stir before applying. Use product when air and surface temperatures are between 50-90°F (10-32°C).
  • Apply a thin, even coat using a 3/8" nap roller cover, pad applicator or a nylon/polyester brush.
  • Allow first coat to dry before deciding if a second coat is necessary. For uniformity apply a second coat (in a criss-cross direction).
  • DO NOT APPLY MORE THAN TWO COATS. An annual touch-up may be required in areas subject to tire traffic.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • The floor may be subjected to light foot traffic after 24 hours. Allow 72 hours before subjecting surface to heavy foot traffic or repositioning furniture.
  • Allow 7 days before subjecting to automotive tires. Premature heavy traffic will cause paint failure requiring spot recoating.
  • If necessary, corrugated cardboard may be used underneath automobile tires after 72 hours.
  • Wait at least 30 days before rinsing or cleaning. Use a mild detergent as needed.
  • Abrasive cleaners and pressure-washers should be used carefully to avoid premature paint failure.

Disposal

  • Properly dispose of all soiled rags. To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like