Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel

BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel

Bring all the decorative qualities of traditional paint to your high-traffic indoor and outdoor surfaces with BEHR PREMIUM Gloss Enamel Porch & Patio Floor Paint. This 100% acrylic formula is great for both wood and concrete surfaces, and between our host of custom colors and computer color matching, the look you want is within reach.

Finish
A Gloss Enamel finish that is mildew resistant for protection and enhancement of your porch and patio floors.
Where to Use
Interior & Exterior concrete and wood porches and patios. Do not use on areas subject to automotive tires.
Coverage
Rough: 200-300 Sq. Ft per Gallon ; Smooth: 300-400 Sq. Ft per Gallon

Latest Featured Reviews

There are currently no featured reviews for BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel
USE BEHR PREMIUM NON-SKID FLOOR FINISH ADDITIVE TO HELP PREVENT SLIPPING ON PAINTED SURFACES.

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

On properly prepared, previously painted or primed Interior or Exterior surfaces. Ideal for Porches, Floors, Decks, Basements, Patios, Siding, Trim, Furniture and Trellises. Not for use on Garage Floors.

Usage Summary

Rough Surface
200-300 Sq. Ft
Smooth Surface
300-400 Sq. Ft.
1 HR
Dry To Touch
4-6 HR
Recoat Time
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease.
  • Remove mildew stains with a mildew stain removing product.
  • New or Weathered Wood: use a product such as BEHR PREMIUM® All-In-One Wood Cleaner No. 63.
  • Uncoated Concrete or Masonry Surfaces: allow new surfaces to cure 30 days. Use a product such as BEHR PREMIUM Concrete &  Masonry Cleaner & Etcher No. 991.
  • Painted Surfaces: Use a product such as BEHR PREMIUM Concrete & Masonry Paint Stripper No.992 to strip old coating. To clean a painted surface in sound condition, use a product such as BEHR PREMIUM Concrete & Masonry Degreaser & Cleaner No. 990.
  • Use a product such as BEHR PREMIUM Concrete & Masonry Cleaner & Etcher No.991 to spot etch all exposed concrete, follow with a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No.880.
  • Scuff sand new/weathered wood and glossy surfaces.
  • Use stainless steel or galvanized nails to prevent nail staining. Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.

Prime

  • Interior: Use a product such as PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • Exterior: Use a product such as PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436
  • Interior/Exterior: Over uncoated concrete or masonry surfaces, use a product such as BEHR PREMIUM® Concrete & Masonry Bonding Primer. 880.

Application

  • Use product when the surface and air temperatures are between 50-90°F (10-32°C). Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8 -1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Spread rate varies, depending on the surface texture, porosity, and application method.
  • Apply second coat in the opposite direction of the first.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity. Allow 72 hours before subjecting to normal use.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.

Clean Up & Disposal

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).