Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR MARQUEE™ Interior Matte

BEHR MARQUEE™ Interior Matte

BEHR MARQUEE Stain-Blocking Paint & Primer Interior Matte is our most advanced interior paint – delivering high-performance one-coat coverage with every color in the exclusive MARQUEE Interior One-Coat Color Collection. Expressing yourself with exactly the colors you want has never been easier. The MARQUEE Interior One-Coat Color Collection offers an extensive palette of colors in both classic and contemporary hues. It’s the combination of MARQUEE Interior Paint & Primer and MARQUEE colors that delivers beautiful one-coat colors. Guaranteed.* Learn More.

Finish
A matte sheen has a flat, low-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Ideal for Every Room
Coverage
Up to 400 Sq. Ft per Gallon

Latest Featured Reviews

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Buy Online

Paint samples, gallons, and five gallons are available online.

Buy Online »

Where to Use

Properly prepared coated interior surfaces. Ideal for every room.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
Up to 400 Sq. Ft.
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime

All Surfaces:

  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. Remove mildew stains with a mildew stain remover.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR MARQUEE paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).

Stained Surfaces:

  • Lock in stains with BEHR MARQUEE as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR MARQUEE to a small section.
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
  • If bleeding continues, a longer dry time is needed before topcoating.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Fully saturate roller for best coverage.
  • Untinted ULTRA PURE WHITE® and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish.
  • Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like