Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

For a bright, polished look on all of your home’s high-use surfaces, choose BEHR PREMIUM PLUS Interior/Exterior Hi-Gloss Enamel paint. This brilliant sheen creates a durable, glass-like finish that wipes clean and resists moisture and mildew, so it’s great for doors, furniture, windows and trim.

Hi-Gloss paints have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
Where to Use
High-use Surfaces
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

Where To Use

For high-use surfaces. Ideal for Kitchens, Bathrooms, Cabinets, Shutters, Doors, Furniture, Garage Doors, Windows and Trim.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
from Freezing


  • Use on previously painted or primed Interior or Exterior surfaces.
  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint and chalk. Wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Etch galvanized metal and rinse thoroughly.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.


  • Use BEHR PREMIUM PLUS® Paint as a primer over properly prepared coated or uncoated surfaces.
  • For stain-blocking, or over oil-based or glossy surfaces, use a product such as BEHR PREMIUM PLUS All-In-One Primer & Sealer No. 75.
  • For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer coat of BEHR PREMIUM PLUS Paint.
  • Prime all metal surfaces before painting.


  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally.
  • Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • Darker colors may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.


  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like