Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior Satin Enamel

PREMIUM PLUS® Interior Satin Enamel

For a paint that’s as versatile as it is beautiful, choose BEHR PREMIUM PLUS Interior Satin Enamel paint. This rich, all-surface sheen is great for any room in the house, and its pearl-like finish makes it perfect for adding a pop of color to both walls and trim.

Finish
A satin enamel has a pearl like finish that is easy to clean.
Where to Use
All Interior surfaces; moderate-to high-traffic areas
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Paint Samples

Paint Samples are the best way to try a color before committing to it.

Buy Samples »

Where To Use

For moderate to high traffic areas. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Kids’ Rooms, Hallways, Kitchens, Bathrooms, Doors, Windows, Trim, Cabinets, Shutters and Interior Furniture.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • BEHR PREMIUM PLUS® paint is self priming over properly prepared uncoated and previously painted Interior surfaces.
  • On stains, over oil-based coatings or glossy surfaces, use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally.
  • Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon. Certain colors may require more than one coat for complete hide.
  • Darker colors may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like