Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Texture Paint

PREMIUM PLUS® Texture Paint

This white texture paint is easy to apply, ideal for hiding imperfections and is reinforced with interwoven fibers for added durability.

Finish
Creates a Smooth, Sand, and Popcorn Finish
Where to Use
Living Rooms, Dining Rooms, Bedrooms, Hallways, and Ceilings.
Coverage
100-200 Sq. Ft Coverage per 2 Gallon container

Latest Featured Reviews

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Where to Use

Primed or low-sheen surfaces. Smooth and Sand Finishes ideal for walls and ceilings in Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens. Popcorn Finish is ideal for ceilings in Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens.

Preparation

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth and allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.

Prime

  • Use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No.75. On new drywall in low-moisture rooms, use a product such as BEHR PREMIUM PLUS® Drywall Primer & Sealer No.73

Application

  • Use product when the surface and air temperatures are between 50-90°F (10-32°C).
  • Stir thoroughly prior to use. Coverage is 100-200 sq. ft. (9-18 m2) per 2 gallon container depending on application technique and surface condition.
  • Initial Application:
  • Apply product to a 4' x 4' section using a looped roller. Continue to work in 4' x 4' sections until the entire surface is complete. Allow to dry at least 4 hours. If necessary, apply a  second coat using the same process. Note: additional coats will increase textured effect.
  • Designer Texture Effect:

  • Apply product to a 4’ x 4’ section using a looped roller and allow to set 5 minutes. Follow the specific technique instructions in the BEHR PREMIUM PLUS® Texture Paint guide.   Continue to work in 4’ x 4’ sections and overlap slightly into the existing section until the entire surface is complete. Allow to dry at least 4 hours.
  • Once the texture finish has dried 24-48 hours, to change color and increase durability, apply PREMIUM PLUS All-In-One Primer & Sealer No.75 and topcoat with BEHR PREMIUM PLUS paint. Refer to paint label for further instruction.

Dry Time

  • Dries in 4 hours at 75°F (23°C) and 50% humidity. Longer dry time required in cooler temperatures and in higher humidity.
  • Surface will fully cure in 1 week.

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like