Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS ULTRA® Interior Matte

PREMIUM PLUS ULTRA® Interior Matte

To bring classic beauty to all of your home’s interior walls, choose BEHR PREMIUM PLUS ULTRA Interior Matte. This traditional matte paint will create a low-reflective appearance that’s perfect for all of your home's rooms. It’s also great for hiding minor flaws, dents and nicks.

Finish
A matte sheen has a flat, low-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Ideal for All Rooms
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

Buy Your Paint Online!

Choose a color & order samples & gallons using ColorSmart by BEHR®.

Get Started »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Buy Online

Paint samples, gallons, and five gallons are available online.

Buy Online »

Where to Use

Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime†

  • All surfaces should be properly prepared and cleaned. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain remover. Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR PREMIUM PLUS ULTRA® paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with BEHR PREMIUM PLUS ULTRA as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR PREMIUM PLUS ULTRA as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before top coating.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR PREMIUM PLUS ULTRA if needed.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like