Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat

BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat

To preserve and protect your home’s textured interior surfaces, choose BEHR PREMIUM PLUS WITH STYLE Venetian Plaster Topcoat. This water-based, clear protective finish will increase the durability of BEHR PREMIUM PLUS WITH STYLE Venetian Plaster in your home’s high-moisture and high-traffic areas, and it dries to a satin sheen.

Finish
Satin Sheen and darken the tone and/or color of the finish.
Where to Use
High moisture and high traffic areas.
Coverage
200 Sq. Ft. per Quart.

Latest Featured Reviews

DO NOT OPEN CAN WITHOUT READING INSTRUCTIONS.

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

As a clear protective topcoat to increase the durability of BEHR® VENETIAN PLASTER in high moisture and high traffic areas. Dries to a satin sheen.

Preparation

  • Apply after the VENETIAN PLASTER finish has completely dried, approximately 24 hours. VENETIAN PLASTER must be burnished prior to topcoat application. DO NOT burnish VENETIAN PLASTER TOPCOAT.

Application

  • Refer to the Interior How-To section on www.behr.com for additional instructions and tips on application. DO NOT THIN. Stir occasionally.
  • Use product when the surface and air temperatures are between 50°-90°F (10°-32°C).
  • Apply using a straight-edged, flexible steel trowel or wall scraper.
  • Hold trowel at an angle and a spread a very thin, even coat of the product across the surface.
  • Remove any excess topcoat with a damp rag or sponge.
  • The topcoat will dry to a Satin sheen and darken the tone and/or color of the finish.
  • Typical spread rate is 200 sq. ft. (19 m2) per quart.

Dry Time

  • Dries in 24 hours at 75°F (24°C) and 50% humidity.
  • Additional dry time is needed in cooler temperatures and higher humidity.
  • After 2 weeks, the surface may be cleaned with a mild, non-abrasive liquid detergent.

Clean Up

  • Use soap and water. Properly dispose of all soiled rags and protect unused product from freezing. For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like