Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

BEHR Masonry, Stucco & Brick Paint - Satin

BEHR Masonry, Stucco & Brick Paint - Satin

A high-quality, satin acrylic latex paint with excellent hiding properties. This interior/exterior, self-priming, mildew-resistant finish provides excellent adhesion & water repellency on properly prepared interior/exterior smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 years in all climatic conditions and cleans up with soap & water.

Click Here to see available colors.

Satin Finish
Where to Use
Properly prepared Interior or Exterior vertical surfaces
250-400 Sq. Ft Coverage per Gallon

Latest Featured Reviews

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Usage Summary

2-3 HR Dry Time 
4 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
from Freezing


Proper surface preparation is required

  • Allow new stucco and masonry to cure for 30 days before painting.
  • Remove all loose, peeling paint. Powerwash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
  • Remove mildew stains with a mildew stain removing product.
  • On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
  • If chalk remains on the surface, prime with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.
  • Prime all patched areas as well as adjacent wood and metal surfaces.
  • If previously sealed or coated, check manufacturer's specifications before painting.


  • Intermix all cans of same product to ensure color uniformity. Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
  • Apply using a high quality 3/4"-1" nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
  • Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
  • Do not re-spread or re-work paint.

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.


  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).