Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Interior paint how-to »

How to Create a Soft Suede Finish

Skill:  Intermediate DIY'er

This striking and livable finish offers a sense of stylish flair to your home.

For Best Results:

Mix the entire quantity of glazing color needed for the project before you start painting. Combining the contents produces uniformity of color. This intermixing is called "boxing."

 
Suggested Supplies
  • Bucket
  • Vinyl Gloves
  • Paint Tray
  • Paint Tray Liner
  • Rags
  • Roller Cover and Frame
  • Stir Stick
  1. Step 1

    Paint the base color and allow it to dry completely before glazing.

  2. Step 2

    To prepare your topcoat glaze color, pour 1 part PREMIUM PLUS ULTRA® or PREMIUM PLUS® Paint (one quart) and 4 parts FAUX GLAZE (one gallon) into a bucket and mix the contents thoroughly. For a more see-through or transparent look, add extra faux glaze to the mixture. For a denser or more opaque glaze color, add more paint to the mixture. The mixture will generally cover approximately 400 sq. ft.

  3. Step 3

    Pour your color glaze mixture into a paint tray and work a 6" mini roller into the glaze until it is fully loaded. To remove excess glaze, roll the tool on the ribbed area of the paint tray.

    TIP:
    Test your technique and color combinations on a practice board before you begin the project.
  4. Step 4

    Starting at a top corner of your project area, roll the colored glaze onto a 3' x 3' section.

  5. Step 5

    While the glaze is wet, bunch up a damp cloth rag and gently roll it over the colored glaze. You will be removing some of the glaze color and allowing some of the base color to show through.

    TIP:
    When your rag becomes saturated with colored glaze, wring it out or switch to a fresh damp rag.
  6. Step 6

    Continue to work in 3' x 3' sections. Overlap and blend each section as you go to avoid hard edges.

    TIP:
    Stand back and preview your work periodically to ensure an even look.
  7. Step 7

    Repeat the process until the project is complete.