Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

For a bright, polished look on all your home's high-use surfaces, choose BEHR PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel. This brilliant sheen creates a durable, glass-like finish that wipes clean and resist moisture and mildew, so its's great for doors, furniture, windows and trim.

Finish
Hi-Gloss paints have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
Where to Use
High-use Surfaces
Coverage
23-37 m2

Latest Featured Reviews

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLOURANTS

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

For high-use surfaces. Ideal for Kitchens, Bathrooms, Cabinets, Shutters, Doors, Furniture, Garage Doors, Windows and Trim.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • Use on previously painted or primed Interior or Exterior surfaces.
  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint and chalk. Wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Etch galvanized metal and rinse thoroughly.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime

  • For Interior, use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • For Exterior, use a product such as BEHR PREMIUM PLUS Multi-Surface Primer & Sealer No. 436.
  • For best results, prime all metal surfaces before painting.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide. Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant. When applying to vinyl, colour choice must be the same colour or lighter than the existing colour. Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like