Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Exterior Multi-Surface Primer & Sealer

PREMIUM PLUS® Exterior Multi-Surface Primer & Sealer

For a versatile primer that’s excellent for stain-blocking, adhesion and sealing Exterior surfaces, choose BEHR PREMIUM PLUS Exterior Multi-Surface Primer & Sealer. This 100% styrene acrylic formula resists medium to heavy stains, and can even be used on metal, aluminum and to cover old oil-based paint. It’s also tintable, so it’s great when you’re looking to make a colour change. This is also a low odour, low VOC formula.

Finish
Dries to a non-reflective sheen which minimizes the appearance of minor surface imperfections.
Where to Use
Over properly prepared uncoated and previously painted exterior surfaces
Coverage
23-37 m2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Over properly prepared uncoated and previously painted Exterior surfaces. Ideal for Masonry, Stucco, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete and on glossy surfaces or oil-based paint.

Usage Summary

30 Min Dries to Touch
1 HR Ready to Topcoat
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
  • Etch galvanized metal with a product such as BEHR PREMIUM No. 991 Concrete & Masonry Cleaner & Etcher.
  • Allow masonry/concrete surface to cure for 30 days before applying.
  • All masonry surfaces must have a pH of 13.0 or less prior to coating.

Application†

  • Apply when air and surface temperatures are between 10-32°C.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Stir primer occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 mL.
  • Two coats may be needed over stains and woods that contain tannins.
  • Spot prime patched areas first, follow with a complete primer coat. Topcoat within 30 days.
  • Bright or deep colours require a tinted primer.
  • Use tint formulas as required by topcoat. Colourants should not exceed 118 mL of colourant per 3.79 L.
    † On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.