Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Exterior Semi-Gloss Enamel

PREMIUM PLUS® Exterior Semi-Gloss Enamel

Add a touch of class and character to your home's exterior accents with BEHR PREMIUM PLUS® Exterior Semi-Gloss Enamel paint. This radiant sheen creates a sleek appearance, with a durable finish that's formulated to withstand wear. It's ideal for trim, doors and windows, but it's also great for shutters and outdoor furniture.

Finish
A Semi-gloss paint sheen is a  sleek, radiant sheen that creates a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Where to Use
Doors, trim and shutters; Exterior furniture
Coverage
23-37 m2

Latest Featured Reviews

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLOURANTS

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Ideal for Wood, Vinyl, Doors, Windows, Trim, Shutters, Garage Doors and Outdoor Furniture.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • Use on previously painted or primed Exterior surfaces. All surfaces should be properly prepared and cleaned.
  • Remove loose paint and chalk. Wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Etch galvanized metal and rinse thoroughly.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • Use a product such as BEHR PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436.
  • For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.
  • For best results, prime all metal surfaces before painting.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide. Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant. When applying to vinyl, colour choice must be the same colour or lighter than the existing colour. Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like