Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Concrete & Masonry Bonding Primer

BEHR PREMIUM® Concrete & Masonry Bonding Primer

For a long-lasting durable finish, use BEHR PREMIUM Concrete & Masonry Bonding Primer. This high-performance water-based primer will promote a uniform topcoat finish and create a stronger adhesion between the coating and surface. It is easy to apply and dries clear.

Finish
N/A
Where to Use
Use on uncoated Interior or Exterior surfaces such as: Concrete, Masonry, Stucco, Cinder Block and any Porous Stone or Brick.
Coverage
33-47 m2

Latest Featured Reviews

DO NOT OPEN CAN WITHOUT READING INSTRUCTIONS. PRODUCT DRIES CLEAR - IT WILL LOOK MILKY IN CAN AND AT INITIAL APPLICATION.

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Use on uncoated Interior or Exterior surfaces such as: Concrete, Masonry, Stucco, Cinder Block and any Porous Stone or Brick. Not designed for use on wood, metal or silicone treated surfaces. Do not use on coated surfaces. Use only on porous surfaces. NOTE: SOME SURFACES MAY APPEAR SLIGHTLY DARKER AFTER PRODUCT DRIES.

Usage Summary

Coverage:
33-47 m2
2 HR Dry Time 
4 HR Ready for Topcoat
Commercial Brush Cleaner
Clean-Up
Protect
from Freezing

Preparation

The following steps are required

  • New concrete must cure for a minimum of 30 days prior to priming.
  • Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove any loose or peeling paint.
  • Do not apply over previously coated surfaces.
  • To completely strip previous coatings, use a product such as BEHR PREMIUM® CONCRETE & MASONRY PAINT STRIPPER NO. 992. Follow all label instructions.
  • For proper penetration and adhesion of primer, use a product such as BEHR PREMIUM® CONCRETE & MASONRY CLEANER & ETCHER NO. 991 to clean and etch the surface. Follow all label instructions.

Application

  • DO NOT THIN. Stir primer thoroughly before and occasionally during application.
  • Use product when air and surface temperatures are between 10-32°C.
  • Apply using a high quality pump sprayer, 10-13 mm nap roller, nylon/polyester brush or a pad applicator.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity
  • Must apply a topcoat after at least 4 hours, but before 30 days.

Disposal

  • Do not use soap and water to clean brushes or other applicators as they will become gummy.
  • Properly dispose of all soiled rags.
  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like