Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Granite Grip™

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 69ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

BEHR PREMIUM® Granite Grip™

A premium decorative floor coating offering a unique multi-speckled texture finish for horizontal concrete & masonry surfaces.  It fills in hairline cracks and resist dirt, grease and household stains. Use this coating to transform weathered concrete surfaces into a decorative granite look with a protective long lasting finish.

NOTE: Must use with 3mm Adhesive Roller Cover

Finish
Unique multi-speckled textured flat finish.
Where to Use
Interior/Exterior horizontal concrete and masonry surfaces
Coverage
Rough: 4-5 m2
Smooth: 5-6 m2 for 2 coats

Latest Featured Reviews

There are currently no featured reviews for BEHR PREMIUM® Granite Grip™
2 COATS REQUIRED FOR OPTIMAL DURABILITY AND COVERAGE

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

MSDS & Data Sheet

Where to Use

Interior/Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Walkways, Patios, Porches and Pool Decks. 

 

Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.

 

READY TO USE OR ADD TINTING COLOURANTS

Usage Summary

2 Coat Coverage

Rough: 4-5 m2

Smooth: 5-6 m2

2 Coats

Required

Dry Time:

1 Hr. Dry to Touch

3-4 Hr. Recoat

Clean-Up:

Soap & Water

Where Not to Use

DO NOT use on vertical surfaces or areas subject to hydrostatic pressure. NOT for industrial use or areas subject to forklifts. 

Preparation†

Proper surface preparation is required.

  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease. 

For Uncoated Concrete or Masonry:

  • Allow new surfaces to cure 30 days. 
  • Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured proile similar to 150 grit sandpaper. 

For Previously Coated Surfaces: 

  • For a painted surface in sound condition, use a product to clean and prepare the surface. 
  • If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. 
  • Scuff sand glossy surfaces. 
  • Clean and spot etch any exposed concrete. 
  • Remove all dust with a damp cloth, allow to dry.

Application

  • DO NOT THIN. 
  • Intermix all cans of same product to ensure colour uniformity.  Stir before applying. 
  • Use product when air and surface temperatures are between 10-32° c. 
  • Do not apply in direct sunlight. 
  • For hairline cracks up to 3mm, completely fill in with coating using a nylon/polyester brush and allow to dry completely prior to roller application. 
  • Do not pour product directly on surface; always use a roller tray.
  • Apply a first coat using a 3 mm" Adhesive Roller Cover or nylon/polyester brush. 
    • NOTE: The first coat will act as the base coat and it will not completely cover the surface by design. 
  • Avoid over application on the first coat.
  • Apply in 1m x 1m, sections. 
  • Begin with the roller in the center of the section and roll outwards in random directions.
  • Avoid regular patterns and knock down hard edges using the roller. 
  • Allow first coat to dry then apply second coat in the same method as the first coat. 
  • While two coats are necessary, additional coats may help hide previous surface imperfections or cover over dark colours. 
  • For large projects, consider using a texture sprayer with a 4mm tip. Spray in 1m x 1m sections and back roll with an adhesive roller cover. 
  • An annual touch-up may be required in areas subject to tire trafic.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity. 
  • The floor may be subjected to light foot traffic after 24 hours. 
  • Allow 72 hours before subjecting surface to automotive tires, heavy foot traffic or repositioning furniture. 
  • Premature heavy traffic will cause paint failure requiring spot recoating.

Clean Up

  • Soap & water clean-up.
  • Wait at least 30 days before rinsing or cleaning. 
  • Use a mild detergent as needed. 
  • Abrasive cleaners and pressure-washers should be used carefully to avoid premature coating failure. 

Disposal

  • Properly dispose of all soiled rags. 
  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.