Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel

BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel is rated 4.3 out of 5 by 12.
  • y_2017, m_4, d_22, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_10204070000100000A-E_CA, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 21ms

BEHR PREMIUM® Porch & Patio Floor Paint - Gloss Enamel

Bring all the decorative qualities of traditional paint to your high-traffic indoor and outdoor surfaces with BEHR PREMIUM Gloss Enamel Porch & Patio Floor Paint. This 100% acrylic formula is great for both wood and concrete surfaces, and between our host of custom colours and computer colour matching, the look you want is within reach.

Click Here to see available colours.

A Gloss Enamel finish that is mildew resistant for protection and enhancement of your porch and patio floors.
Where to Use
Interior & Exterior concrete and wood porches and patios. Do not use on areas subject to automotive tires.
Rough: 18-28 m2
Smooth: 28-37 m2

Latest Featured Reviews


Where to Use

On properly prepared, previously painted or primed Interior or Exterior surfaces. Ideal for Porches, Floors, Decks, Basements, Patios, Siding, Trim, Furniture and Trellises. Not for use on Garage Floors.

Usage Summary

Rough Surface

18-28 m2
Smooth Surface
28-37 m2


1 HR
Dry To Touch
4-6 HR
Recoat Time

Soap & Water

from Freezing


  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease.
  • Remove mildew stains with a mildew stain removing product.
  • New or Weathered Wood: use a product such as BEHR PREMIUM® All-In-One Wood Cleaner No. 63.
  • Uncoated Concrete or Masonry Surfaces: allow new surfaces to cure 30 days. Use a concrete & masonry cleaner and etcher product.
  • Painted Surfaces: Strip old coating and clean with a concrete & masonry degreaser and cleaner product.
  • Use a concrete & masonry cleaner and etcher product to spot etch all exposed concrete, follow with a product such as BEHR PREMIUM® Concrete & Masonry Bonding Primer No. 880.
  • Scuff sand new/weathered wood and glossy surfaces.
  • Use stainless steel or galvanized nails to prevent nail staining. Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.


  • Interior: Use a product such as PREMIUM PLUS® All-In-One Primer & Sealer No. 75
  • Exterior: Use a product such as PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436
  • Interior/Exterior: Over uncoated concrete or masonry surfaces, use a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer. 880.


  • Use product when the surface and air temperatures are between 10-32°C.
  • Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Spread rate varies, depending on the surface texture, porosity and application method.
  • Apply second coat in the opposite direction of the first.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 mL
  • Certain colours may require more than one coat for complete hide.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • Allow 72 hours before subjecting to normal use.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.


  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.