Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior Ceiling Paint

PREMIUM PLUS® Interior Ceiling Paint

For a paint specifically designed to take on a variety of ceiling surfaces, choose BEHR PREMIUM PLUS Interior Ceiling Paint. This flat, non-reflective sheen is spatter-resistant, and will maintain the original acoustical properties of your ceiling.

Finish
A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Primed or painted Interior Ceilings.
Coverage
23-37 m2

Latest Featured Reviews

FOR TINT BASES - DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where To Use

Primed or painted Interior Ceilings.

Usage Summary

30 Min Dry Time
1 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.

Prime†

  • Use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No.75.
  • On new drywall in low-moisture rooms, use a product such as BEHR PREMIUM PLUS® Drywall Primer & Sealer No. 73.
  • For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.

Application

  • Use product when the surface and air temperatures are between 10-32ºC.
  • Stir paint occasionally. Intermix containers of the same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015”-.019” spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide.
  • Darker colours may require additional dry time between coats.
  • Popcorn style acoustic ceilings, use acoustic ceiling roller cover or airless sprayer (.015-.017 spray tip).
  • Cooler temperatures or higher humidity may prolong drying time.

Dry Time

  • Dries to touch in two hours at 25ºC and 50% humidity, re-coat in 4 hours. Longer dry time required in cooler temperatures and in higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant

 

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like