Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Drywall Primer & Sealer

PREMIUM PLUS® Drywall Primer & Sealer

For excellent performance under flat and eggshell paints, choose BEHR PREMIUM PLUS Drywall Primer & Sealer. This 100% acrylic formula is more versatile than PVA primers, making it ideal for wood, woodboard, drywall and other porous surfaces in all your home's low-moisture rooms. It also seal untreated wood, and it's tintable to allow for dramatic colour change.

Finish
A non-reflective finish that has excellent performance under a flat or eggshell paints.
Where to Use
Ideal for Drywall, Plasterboard, Wallboard and Wood.
Coverage
23-37 m2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Over properly prepared uncoated and previously painted Interior surfaces in low-moisture areas. Ideal for Drywall, Plasterboard, Wallboard and Wood. Not recommended under SATIN, SEMI-GLOSS and HI-GLOSS paint. Bright or deep colours require a tinted primer. Use tint formulas as required by topcoat. Colourants should not exceed 118 mL of colourant per 3.79 L.

Usage Summary

30 Min Dries to Touch
1 HR Ready to Topcoat
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Stir primer occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L. Bright or deep colours require a tinted primer.
  • Have this product tinted close to topcoat colour with no more than 118 mL of colorant per 3.79 L.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like