Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

PREMIUM PLUS® Interior/Exterior Hi-Gloss Enamel

For a bright, polished look on all of your home’s high-use surfaces, choose BEHR PREMIUM PLUS Interior/Exterior Hi-Gloss Enamel paint. This brilliant sheen creates a durable, glass-like finish that wipes clean and resists moisture and mildew, so it’s great for doors, furniture, windows and trim.

Hi-Gloss paints have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
Where to Use
High-use Surfaces
12-37 2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where To Use

For high-use surfaces. Ideal for Kitchens, Bathrooms, Cabinets, Shutters, Doors, Furniture, Garage Doors, Windows and Trim.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Soap & Water
from Freezing


  • Use on previously painted or primed Interior or Exterior surfaces.
  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint and chalk. Wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Etch galvanized metal and rinse thoroughly.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.


  • For Interior, use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • For Exterior, use a product such as BEHR PREMIUM PLUS Multi-Surface Primer & Sealer No. 436.
  • For best results, prime all metal surfaces before painting.


  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 mL.
  • Certain colours may require more than one coat for complete hide.
  • Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, colour choice must be the same colour or lighter than the existing colour.
  • Do not use on floors.


  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like