Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® All-In-One Primer & Sealer

PREMIUM PLUS® All-In-One Primer & Sealer

For excellent performance under any paint sheen, choose BEHR PREMIUM PLUS® All-In-One Primer & Sealer. This self-leveling acrylic blend helps create a uniform topcoat sheen, so it’s ideal for multiple surfaces, including metal, vinyl, concrete and glossy surfaces. It blocks medium to heavy stains, and it’s tintable to allow for dramatic colour changes. This is also a low odour, zero VOC formula.

Finish
The self-leveling acrylic blend helps create a uniform topcoat sheen.
Where to Use
Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.
Coverage
23-37 m2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Over properly prepared uncoated and previous painted Interior surfaces. Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint. Colourants should not exceed 118 mL of colourant per 3.79 L.

Usage Summary

30 Min Dries to Touch
1 HR Ready to Topcoat
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Use a high quality 10-13 mm nap roller cover, nylon polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Stir occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Heavy stains may require two coats. Spot prime patched areas first, follow with a complete primer coat.
  • Bright or deep colours require a tinted primer.
  • Have primer tinted close to topcoat colour with no more than 4 ounces of colorant per gallon.
  • † On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like