Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior Semi-Gloss Enamel

PREMIUM PLUS® Interior Semi-Gloss Enamel

For a paint that’s tough enough to tackle any room in your home without sacrificing beauty, choose BEHR PREMIUM PLUS® Interior Semi-Gloss Enamel paint. This sleek sheen resists mildew and wear, so it’s great for bathrooms and kitchens, and its radiant appearance makes it great for adding colour to cabinets, trim and indoor furniture.

Finish
A semi-gloss paint has a sleek, radiant sheen that resists mildew, moisture and wear.
Where to Use
Cabinets and trim; high-traffic, high-moisture areas.
Coverage
23-37 m2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

For high traffic/high moisture areas. Ideal for Kids’ Rooms, Hallways, Kitchens, Bathrooms, Doors, Windows, Trim, Cabinets, Shutters and Interior Furniture.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • BEHR PREMIUM PLUS® paint is self priming over properly prepared uncoated and previously painted Interior surfaces.
  • On stains, over oil-based coatings or glossy surfaces, use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide.
  • Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like