Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Texture Paint

PREMIUM PLUS® Texture Paint

This white texture paint is easy to apply, ideal for hiding imperfections and is reinforced with interwoven fibers for added durability.

Finish
Creates a Smooth, Sand, and Popcorn Finish
Where to Use
Living Rooms, Dining Rooms, Bedrooms, Hallways, and Ceilings.
Coverage
9-18 m2 per 7.58 L

Latest Featured Reviews

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Where to Use

Previously painted or primed Interior ceilings. Ideal for Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens.

Preparation

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Inset and fill nailheads, sand smooth.
  • Remove all dust with a damp cloth and allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.

Prime

  • Use a product such as BEHR PREMIUM PLUS® All-In-One Primer & Sealer No.75. On new drywall in low-moisture rooms, use a product such as BEHR PREMIUM PLUS® Drywall Primer & Sealer No.73

Application

  • Use product when the surface and air temperatures are between 10-32°C.
  • Stir thoroughly prior to use. Coverage is 9-18 sq. m. per 7.58 L (100-200 sq. ft. per 2 gallon container) depending on application technique and surface condition.
  • Initial Application:
  • Apply a thin coat to a 1.2m x 1.2m (4' x 4') area using a looped roller.
  • Continue to work in a 1.2m x 1.2m (4' x 4') sections until the entire surface is complete.
  • Allow to dry at least 4 hours. If necessary, apply a second coat using the same process. Note: additional coats will increase textured effect.
  • Designer Texture Effect:

  • Apply product to a 1.2m x 1.2m section using a looped roller and allow to set 5 minutes. Follow the specific technique instructions in the BEHR PREMIUM PLUS® Texture Paint guide.
  • Continue to work in 1.2m x 1.2m sections and overlap slightly into the existing section until the entire surface is complete. Allow to dry at least 4 hours.
  • Once the texture finish has dried 24-48 hours, to change colour and increase durability, apply PREMIUM PLUS All-In-One Primer & Sealer No.75 and topcoat with BEHR PREMIUM PLUS paint. Refer to paint label for further instruction.

Dry Time

  • Dries to touch in 2 hours at 23°C and 50% humidity. Longer dry time required in cooler temperatures and in higher humidity.
  • Surface will fully cure in 1 week.

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like