Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS ULTRA® Interior Matte

PREMIUM PLUS ULTRA® Interior Matte

To bring classic beauty to all of your home’s interior walls, choose BEHR PREMIUM PLUS ULTRA Interior Matte. This traditional matte paint will create a low-reflective appearance that’s perfect for all of your home's rooms. It’s also great for hiding minor flaws, dents and nicks.

Finish
A matte sheen has a flat, low-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Ideal for All Rooms
Coverage
23-37 m2

Latest Featured Reviews

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime†

  • All surfaces should be properly prepared and cleaned. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain remover. Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR PREMIUM PLUS ULTRA® paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with BEHR PREMIUM PLUS ULTRA as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR PREMIUM PLUS ULTRA as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before top coating.
  • For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR PREMIUM PLUS ULTRA if needed.

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L. Certain colours may require more than one coat for complete hide.
  • Darker colours may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like