Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint

PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint

For advanced performance and stain-blocking on all of your home’s ceilings, choose BEHR PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint. Its flat sheen hides minor surface imperfections, and can be tinted to light colours.

Finish
A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Properly prepared coated and uncoated Interior Ceilings.
Coverage
23-37m2

Latest Featured Reviews

DO NOT OPEN CAN WITHOUT READING INSTRUCTIONS. PROTECT FROM FREEZING.

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

MSDS & Data Sheet

Where to Use

Properly prepared coated and uncoated Interior Ceilings.

Usage Summary

30 Min Dry Time
1 HR Recoat Time
23-37 m2
(250-400 Sq. Ft)
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.
  • Make sure that there are no active water problems and that any previous water damage is fully dry.
  • Use BEHR PREMIUM PLUS ULTRA® STAIN-BLOCKING CEILING PAINT as a primer for repaired or uncoated surfaces.
  • Lock in stains with BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a spot primer. For heavy stains, test for stain bleedthrough by applying BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating the entire ceiling. If bleeding continues, a longer dry time is needed before topcoating. Additional coats may be needed to achieve hide.
  • For drastic colour changes, apply a primer coat of BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT if needed.

Application

  • Spatter and drip resistant.
  • Use product when the surface and air temperatures are between 10-32°C.
  • Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Coverage is 23-37 m2 (250-400 sq. ft.) per gallon depending on the surface texture, porosity and application method.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Multiple coats may be required to complete hide.
  • Popcorn style acoustic ceilings; use acoustic ceiling roller cover 10-13 mm or airless sprayer (.015-.019” spray tip, 60 mesh filter).

Dry Time

  • Dries to touch in 30 minutes at 25°C and 50% humidity, re-coat in 1 hour.
  • Longer dry time required in cooler temperatures and in higher humidity.
  • Dry paint film is mildew resistant

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of empty containers and unused product, contact your local household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like