Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM PLUS WITH STYLE® Faux Glaze

BEHR PREMIUM PLUS WITH STYLE® Faux Glaze

To create a wide array of stunning effects on your home’s interior walls, choose BEHR PREMIUM PLUS WITH STYLE Faux Glaze. This water-based formula creates a translucent finish, and can be blended with BEHR PREMIUM PLUS ULTRA® or BEHR PREMIUM PLUS® Interior paints to create custom looks like fabric, patch weaving and smooth leather.

Finish
Translucent finish that creates custom looks like fabric, patch weaving and smooth leather.
Where to Use
Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Kids’ Rooms, Hallways, Kitchens, Bathrooms, Doors, Trim and Ceilings.
Coverage
37 m2

Latest Featured Reviews

THIS PRODUCT IS TO BE BLENDED WITH BEHR PREMIUM PLUS® INTERIOR PAINTS.

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Properly painted Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Kids’ Rooms, Hallways, Kitchens, Bathrooms, Doors, Trim and Ceilings.

Preparation

  • Remove loose paint, wash off any dirt and grease with detergent and remove mildew stains with a mildew stain removing product. Rinse and allow to dry. Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth. Remove all dust with a damp cloth and allow to dry.
  • Allow new stucco, plaster and masonry to cure 30 days before priming.
  • Use BEHR PREMIUM PLUS® All-In-One Primer & Sealer No. 75.
  • Apply Interior Eggshell, Satin or Semi-Gloss sheen for the base colour according to label instructions.

Mixing the Glaze Colour

  • In a plastic container, blend 1 part paint (1 quart) to 4 parts glaze (1 gallon) for each selected glaze colour.
  • Stir glaze mixture until thoroughly blended and occasionally during application.

Application

  • Refer to the Interior How-To section on www.behr.com for additional instructions and tips on application.
  • Using the appropriate tool and technique, apply the glaze colour over the dried base colour. Work in 1m x 1m areas (3 ft x 3 ft) or smaller depending on the technique.
  • Blend from section to section in a random pattern and maintain a wet edge to ensure smooth transitions.
  • Typical coverage is 37 m2 per 3.79 L. (400 sq. ft. per gallon.)
  • Coverage may vary depending upon the surface and the desired effect.
  • For maximum protection over the finish, after the glaze colour has dried a minimum of 48 hours, apply a coat of clear water-based polyurethane.

Dry Time

  • Dries to touch in 1 hour at 24°C and 50% humidity.
  • Allow 4 hours to dry between coats. Longer dry time required in cooler temperatures and in higher humidity.
  • After 30 days, the surface is fully cured and may be cleaned with a mild, non-abrasive liquid detergent.

Clean Up

  • Wash tools with soap and water.
  • Wipe excess product from lip of container prior to sealing to keep glaze from gluing lid closed.
  • Dried spills must be cleaned with lacquer thinner or paint remover.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like