Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR® Masonry, Stucco & Brick Paint - Flat

BEHR® Masonry, Stucco & Brick Paint - Flat

A high-quality, flat acrylic latex paint with excellent hiding properties. This interior/exterior, self-priming, mildew resistant finish also provides excellent adhesion & water repellency on properly prepared interior/exterior smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 years in all climatic conditions and cleans up with soap and water.


Click Here to see available colours.

Finish
Where to Use
Properly prepared Interior or Exterior vertical surfaces as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal.
Coverage
Rough: 23-28 m2 ; Smooth 37 m2

Latest Featured Reviews

There are currently no featured reviews for BEHR® Masonry, Stucco & Brick Paint - Flat
READY TO USE OR ADD TINTING COLOURANTS

Browse for Colours Online

Browse, coordinate and preview colours now, with ColourSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Usage Summary

2-3 HR Dry Time 
4 HR Recoat Time
Spread Rate:
Rough
23-28 m2
Smooth 37 m2
Soap & Water
Clean-Up
Protect
from Freezing

Preparation

Proper surface preparation is required.

  • Allow new stucco and masonry to cure for 30 days before painting.
  • Remove all loose, peeling paint. Powerwash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
  • Remove mildew stains with a mildew stain removing product.
  • On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
  • If chalk remains on the surface, prime with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.
  • Prime all patched areas as well as adjacent wood and metal surfaces.
  • If previously sealed or coated, cheque manufacturer's specifications before painting.

Application

  • DO NOT THIN.
  • Intermix all cans of same product to ensure colour uniformity. Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 10-32˚C. Do not use if rain or heavy dew is expected within 24 hours.
  • Apply using a high quality 19-25 mm nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
  • Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
  • Do not re-spread or re-work paint.

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Disposal

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.