Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® All-In-One Wood Cleaner

BEHR PREMIUM® All-In-One Wood Cleaner

Whether you’re preparing your deck for a stain or finish, or just doing regular maintenance, BEHR PREMIUM All-In-One Wood Cleaner gives you the cleaning power you need to restore your deck’s natural beauty. It’s tough enough for stains caused by mold mildew, ketchup and wine, but gentle enough that it won’t damage your wood surface.

Finish
Leaves your wood looking clean and restored with it's natural colour.
Where to Use
Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete.
Coverage
Full Strength: 18 m2 ; Diluted: 37 m2

Latest Featured Reviews

TO DILUTE, USE 1 PART CLEANER TO 1 PART WATER

WoodSmart by Behr

Learn about product selection, preparation, and how to's for your stain project with WoodSmart by Behr.

Start WoodSmart »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Exterior Wood & Composites, Decks, Siding, Shakes, Shingles, Fences & Patio Furniture, Vinyl & Aluminum Siding, Masonry, Stucco and Concrete.

  • Removes exterior stains caused by mold, mildew, algae & fungus. Removes household stains such as BBQ Sauce, Ketchup, Wine, etc. Neutralizes wood surface after stripping. Restores the wood to its natural colour.

 

Usage Summary

Coverage:
Full Strength 18 m2
Diluted 37 m2
Keep Surface Wet
During Use
Soap & Water
Clean-Up

Preparation

The following steps and products are recommended for best results.

  • Be sure to have a source for water, hose with nozzle and stiff bristle broom or brush.
  • Wear protective clothing, goggles, acid resistant gloves.
  • Always use BEHR PREMIUM® NO. 63-N All-In-One Wood Cleaner after application of BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper.
  • Prevent all rinse solution from entering storm drains.

 

Application

  • Must apply between 5-32˚C. Shake well before use.
  • Conduct a small test patch in an inconspicuous area to ensure product performance.
  • Be sure that the plastic mixing container is large enough to hold up to 7.58 litres of diluted solution.
  • DO NOT MIX IN METAL CONTAINER. Dilute 1 part of product with 1 part tap water (1:1 dilution) in a clean plastic container.
  • To remove rust, tannin bleed, red clay stains and for extremely hard to clean weathered wood surfaces, use product at full strength.
  • Wet surfaces with water prior to cleaning. Apply solution liberally with a pump sprayer, brush, mop or roller. Keep the surface completely wet with solution for 10-15 minutes.
  • Scrub surface using a stiff bristle broom or brush. The solution will foam.
  • After scrubbing, rinse thoroughly with water at normal pressure, or use a pressure washer at low setting (500-1200 PSI or 35-84 kg.cm2). DO NOT USE HIGH PRESSURE as this may harm the wood.
  • Surfaces other than wood may be dulled if not rinsed off quickly.
  • Let surface dry then lightly sand any loose wood fibers with medium grit sandpaper. Sweep away dust before coating.

Disposal

  • Biodegradable. Properly dispose of all soiled rags. To recycle or properly dispose of paint in your community, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like