Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Semi-Transparent Weatherproofing All-In-One Wood Stain & Sealer

BEHR PREMIUM® Semi-Transparent Weatherproofing All-In-One Wood Stain & Sealer

Enhance your wood's natural patterns while providing increased protection from the elements. This 100% acrylic formula seals out the elements, and sun's harmful UV rays, for up to 6 yrs. on decks and up to 8 yrs. on fences & siding. It's available in 60 custom colours to help you create a look that's as beautiful as it is durable.

Finish
Semi-Transparent film that enhances the wood's natural patterns.
Where to Use
For properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure).
Coverage
1st Coat: 23-28 m2 ; 2nd Coat: 46-56 m2

Latest Featured Reviews

ALWAYS ADD TINTING COLOURANTS BEFORE USING. FOR BEST RESULTS, APPLY SECOND COAT THINNER THAN FIRST COAT.

WoodSmart by Behr

Learn about product selection, preparation, and how to's for your stain project with WoodSmart by Behr.

Start WoodSmart »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Recommended for properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Usage Summary

Must Prep
Before Staining
2 Thin Coats 
Required
1st Coat
23-28 m2
2nd Coat
46-56 m2
Soap & Water
Clean-Up

Preparation

(The following steps and products are recommended for best results.)

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.
  • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Application

(For best results, a pad applicator is recommended over large areas.)

  • Must apply between 5-32˚C. Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
  • Intermix multiple containers to ensure colour uniformity. DO NOT THIN PRODUCT. Stir product occasionally throughout application. Test product for penetration and colour on a small hidden area before proceeding.
  • Use a nylon/polyester brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only.
  • Use 10 mm nap or longer when appropriate. A high quality pump sprayer with a variable tip or an airless sprayer with a .38 mm - .48 mm (.015 - .019") tip may be used.
  • Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain.
  • Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
  • Over application of stain will lead to surface failure including peeling and cracking.
  • Avoid applying stain too heavily. Two thin coats required.
  • For optimum performance, coat all six sides of wood.

Dry Time

  • 1-2 hours before recoat. Allow 72 hours for full cure.

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-661-1591.

Other Products You May Like