Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PREMIUM® Transparent Penetrating Oil Wood Finish

BEHR® Transparent Waterproofing Wood Finish is rated 2.8 out of 5 by 6.
  • y_2017, m_4, d_22, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_10102051000200000-E_CA, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 96ms
  • REVIEWS, PRODUCT

BEHR PREMIUM® Transparent Penetrating Oil Wood Finish

This easy to apply oil base transparent finish enhances the natural beauty of wood. It provides UV protection and is low maintenance. It also features a mildew resistant finish and is ideal for new to slightly weathered uncoated and unsealed exterior wood surfaces.

Finish
Creates a Clear Finish that showcases the full natural beauty of the wood.
Where to Use
Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces.
Coverage
23-28 m2

Latest Featured Reviews

READY TO USE, PROTECT FROM FREEZING.

WoodSmart by Behr

Learn about product selection, preparation, and how to's for your stain project with WoodSmart by Behr.

Start Woodsmart >>

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as; Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Usage Summary

Must Prep

Before Applying

Wood Finish

1 Coat

Application

Spread Rate

Cpvers 23-28 m2

 

Clean-Up

Mineral Spirits

or Paint Thinner

Preparation

Proper surface preparation is required.

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
  • When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. Allow the area to dry at least 24 hours before coating.
  • Lightly sand to remove remaining wood fibers/fuzz.

Application

For best results, a pad applicator is recommended over large deck areas.

  • Must apply between 5-32˚C.
  • Avoid applying in direct sunlight or to hot surfaces. Do not use if rain is expected within 24 hours.
  • The surface must be completely dry before application. Intermix multiple containers to ensure colour uniformity.
  • DO NOT THIN PRODUCT. Stir product occasionally throughout application.
  • Test product for penetration and colour on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only. Use 10 mm nap or longer when appropriate.
  • A high quality pump sprayer with a variable tip or an airless sprayer with a .33 -.43 mm tip (60 mesh filter) may be used.
  • Lightly saturate the surface and back-brush any excess finish by using pad applicator.
  • Be sure to eliminate puddling and evenly distribute the finish.
  • Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
  • Avoid applying finish too heavily. One coat application.
  • For optimum performance, coat all accessible sides.

Maintenance

  • When colour has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish.
  • Product can be applied annually if needed.

Dry Time

  • Dry to touch after 2-4 hours depending on wood porosity.
  • 24-48 hours before foot traffic. 72 hours for full cure.

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.