How to Create a Basic Roll-On Finish | Behr PaintFind how to create a basic roll-on finish in your home interior with this guide from Behr Paint.how to create a basic roll-on finish, basic roll-on finish, faux finish, how to create a faux finish, decorative finish, how to create a decorative finish, textured finish, paintworld, primer guideLet the experts at Behr Paints and Faux Finishes show you how to use Premium Plus Interior Texture Paint to create a basic roll-on finish on your interior walls. There is no need to be afraid of a project when Behr is there to guide you.Begin your project by transferring PREMIUM PLUS® Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and the baseboards.
TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.Place a 5-gallon bucket grid in the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from top to bottom, paint the next 3’ x 3’ section directly below the previous one.
TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.
Repeat this process of forming columns until the entire working surface is covered.Allow the first coat of texture paint to dry thoroughly. Then begin applying a second coat following the process above.
TIP: Applying a second coat will provide a more uniform and consistent appearance.Continue until the entire surface is covered.To add color, apply a topcoat of PREMIUM PLUS® Interior Paint to the surface using the “W and fill-in process” after the roll-on finish has cured for 24 hours.
TIP: Applying a topcoat of paint increases the protection of the textured finish.Repeat the process until the project is complete.Color Used: Swan Sea 500F-4 (Shown on Sand Finish Texture Paint)How to Create a Basic Roll-On Finish- Learn how to create this roll-on finish on your walls.
- /howto/basicrollon_intro_image.jpg
basicrollon_intro_image.jpg- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image- Novice DIY'er
- 1
- interior, decorative, texture paint, basic roll-on, faux finish, topcoat, technique, columns, speciality paint, texture paint, project, walls, drywall, plaster, PREMIUM PLUS Texture Paint, Premium Plus Interior Paints and Primers
- /printable/howto/how_to_basic_rollon.pdf
Paint World- Explore Paintworld<br><br>
- /Marketing/paintworld_ico.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 425.0
- Step 1
- Begin your project by transferring PREMIUM PLUS<font face='Superscript'>®</font> Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.
- /howto/rollon1popup.jpg
- /howto/rollon1.jpg
rollon1popup.jpg- Step 2
- Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and the baseboards. <br /><br /><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off the excess paint against the inside wall of the bucket.
- /howto/text1popup.jpg
- /howto/text1.jpg
text1popup.jpg- Step 3
- Place a 5-gallon bucket grid in the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.
- /howto/rollon6popup.jpg
- /howto/rollon6.jpg
rollon6popup.jpg- Step 4
- Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.
- /howto/rollon7popup.jpg
- /howto/rollon7.jpg
rollon7popup.jpg- Step 5
- Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from top to bottom, paint the next 3’ x 3’ section directly below the previous one.<br><br><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off the excess paint against the inside wall of the bucket.<br><br>
- /howto/rollon8popup.jpg
- /howto/rollon8.jpg
rollon8popup.jpg- Step 6
- Repeat this process of forming columns until the entire working surface is covered.
- /howto/rollon9popup.jpg
- /howto/rollon9.jpg
rollon9popup.jpg- Step 7
- Allow the first coat of texture paint to dry thoroughly. Then begin applying a second coat following the process above. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Applying a second coat will provide a more uniform and consistent appearance.
- /howto/rollon10popup.jpg
- /howto/rollon10.jpg
rollon10popup.jpg- Step 8
- Continue until the entire surface is covered.
- /howto/rollon10_1popup.jpg
- /howto/rollon10_1.jpg
rollon10_1popup.jpg- Step 9
- To add color, apply a topcoat of PREMIUM PLUS<font face='Superscript'>®</font> Interior Paint to the surface using the “W and fill-in process” after the roll-on finish has cured for 24 hours. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Applying a topcoat of paint increases the protection of the textured finish.
- /howto/rollon13popup.jpg
- /howto/rollon13.jpg
rollon13popup.jpg- Step 10
- Repeat the process until the project is complete.
- /howto/rollonfinishpopup.jpg
- /howto/rollonfinish.jpg
rollonfinishpopup.jpg- <font face="Frutiger67Condensed"><font face="Frutiger76Italic">Color Used:</font></font> Swan Sea 500F-4 (Shown on Sand Finish Texture Paint)
Primer Guide- guide
- /Marketing/Primer_Guide/main.swf
- Brush (2”–2½”)
- /equipment/brush_nyl.png
- Bucket (5-Gallon)
- /equipment/5galbucket.png
- Bucket Grid
- /equipment/bucketgrid.png
- Drop Cloths
- /equipment/dropcloth_1.png
- Extension Pole
- /equipment/extensionpole.png
- Vinyl Gloves
- /equipment/gloves.png
- Ladder
- /equipment/ladder.png
- Painter’s Tape
- /equipment/painterstape_2.png
- Protective Apparel
- /equipment/protapparel.png
- Rags
- /equipment/rags.png
- Texture Roller Cover
- /equipment/texture_roller.png
- Roller Frame
- /equipment/roller.png
- Stir Stick
- /equipment/stirsticks.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
- Premium Plus Ultra Interior Paints
PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /Products/product_images/1700_01r_c.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
- Premium Plus Interior Paints and Primers
PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /product/1050_01_135992rc.png
PREMIUM PLUS<font face='Superscript'>®</font> Texture Paint - PREMIUM PLUS® Texture Paint
- /product/559_02_212443c.png
- 1010101000030-I
- 1
- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background ImageBasic Roll-On- /howto/basicrollonfinishb.jpg
- /howto/basicrollonfinisha.jpg
- /howto/basicrollonfinishd.jpg
- /howto/basicrollonfinishc.jpg
- Basic Roll-On
Explore Paint World- Explore Paintworld<br><br>
- /Behr/Products/product_images/paintworld.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 400.0
|