1. How to Create a Wavy Line Finish | Behr Paint

  2. Find how to create a wavy line finish on home interior walls with this guide from Behr Paint.

  3. how to create a wavy line finish, wavy line finish, how to create a faux finish, decorative finish, how to create a decorative finish, textured finish, paintworld, paint calculator, primer guide

  4. Let Behr Paints and Faux Finishes show you how to use Premium Plus With Style Faux Glaze to create a wavy line finish on your walls. Let the how to guide from the experts at Behr show you how to achieve the exact look you want in your home.

  5. A Faux Finish is easily created by applying one or more colored glazes over a new or existing base color. Interested in using your existing surface color as the base color? No problem, as long as it is in good condition. If you’re choosing a new base color, we recommend PREMIUM PLUS ULTRA® or PREMIUM PLUS® Interior Paint in a Eggshell, Satin, or Semi-Gloss Enamel sheen.

  6. To prepare your topcoat glaze color, pour 1 part PREMIUM PLUS® paint (one quart) and 4 parts FAUX GLAZE (one gallon) into a bucket and mix the contents thoroughly. For a more see-through or transparent look, add extra faux glaze to the mixture. For a denser or more opaque glaze color, add more paint to the mixture. The mixture will generally cover approximately 400 sq. ft.

    TIP: Mix the entire quantity of glazing color needed for the project before you start painting. Combining the contents produces uniformity of color. This intermixing is called “boxing.”

  7. Dip a quality 2”–2½” wide nylon/polyester brush into the color glaze mixture from the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at the top corner and continue along the ceiling and around the baseboards.

    TIP: To avoid drips, tap off excess paint against the inside wall of the bucket.

  8. Pour your color glaze mixture into a paint tray and work a 6” mini roller into the glaze until it is fully loaded. To remove excess glaze, roll the tool on the ribbed area of the paint tray.

    TIP: Test your technique and color combinations on a practice board before you begin the project.

  9. Starting at a top corner of your project area, roll the colored glaze down the length of the surface in a 3’ wide vertical section.

  10. While the glaze is still wet, drag a whisk broom from top to bottom over the section. Move it slightly from side to side in a wavy motion.

    TIP: A dry whisk broom or almost any dry brush (4” or wider) will create a basic wavy line effect. (The softer the brush, the less distinct the pattern will be). On smooth walls, a notched trowel or scarifier will create stronger, bolder patterns.

  11. Continue to work in 3’ wide vertical sections. Overlap and blend each section as you go to avoid hard edges.

    TIP: Always wipe your whisk broom with a cloth rag or a paper towel after each pass. Stand back and preview your work periodically to ensure an even look.

  12. Repeat the process until the project is complete.

  13. Colors Used: Base Color: Hawaiian Passion S-G-300, Glaze Color: Falling Leaves S-H-240

  14. How to Create a Wavy Line Finish

  15. Learn how to create a wavy line look on your walls.
  16. /howto/wavyline_intro_image.jpg
  17. wavyline_intro_image.jpg

  18. /Marketing/Page_Images/how_to_page_image_blue.jpg
  19. 0x7D999F
  20. 0xBBCDCA
  21. normal
  22. Blue Background Image

  23. Intermediate DIY'er
  24. 1
  25. interior, decorative, wavy lines, faux glaze, faux finish, whisk broom, technique, glazing, classic lines, project, walls, drywall, plaster, PREMIUM PLUS WITH STYLE Faux Glaze No. 748, Premium Plus Interior Paints and Primers
  26. /printable/howto/how_to_wavy_line.pdf
  27. Paint World

  28. Explore Paintworld<br><br>
  29. /Marketing/paintworld_ico.png
  30. image_swf
  31. /Behr_Common/Paint_World/main.swf
  32. layer
  33. 850.0
  34. 425.0
  35. Start with a Base Color
  36. A Faux Finish is easily created by applying one or more colored glazes over a new or existing base color. Interested in using your existing surface color as the base color? No problem, as long as it is in good condition. If you’re choosing a new base color, we recommend PREMIUM PLUS ULTRA<font face='Superscript'>®</font> or PREMIUM PLUS<font face='Superscript'>®</font> Interior Paint in a Eggshell, Satin, or Semi-Gloss Enamel sheen.<br><br>
  37. /howto/wavyline_best_results.jpg
  38. Step 1
  39. To prepare your topcoat glaze color, pour 1 part PREMIUM PLUS<font face='Superscript'>®</font> paint (one quart) and 4 parts FAUX GLAZE (one gallon) into a bucket and mix the contents thoroughly. For a more see-through or transparent look, add extra faux glaze to the mixture. For a denser or more opaque glaze color, add more paint to the mixture. The mixture will generally cover approximately 400 sq. ft. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Mix the entire quantity of glazing color needed for the project before you start painting. Combining the contents produces uniformity of color. This intermixing is called “boxing.”
  40. /howto/wavylinefallingleavespourpopup.jpg
  41. /howto/wavylinefallingleavespour.jpg
  42. wavylinefallingleavespourpopup.jpg

  43. Step 2
  44. Dip a quality 2”–2½” wide nylon/polyester brush into the color glaze mixture from the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at the top corner and continue along the ceiling and around the baseboards. <br /><br /><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off excess paint against the inside wall of the bucket.
  45. /howto/wavy1popup.jpg
  46. /howto/wavy1.jpg
  47. wavy1popup.jpg

  48. Step 3
  49. Pour your color glaze mixture into a paint tray and work a 6” mini roller into the glaze until it is fully loaded. To remove excess glaze, roll the tool on the ribbed area of the paint tray. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Test your technique and color combinations on a practice board before you begin the project.
  50. /howto/wavylinefallingleavesrollpopup.jpg
  51. /howto/wavylinefallingleavesroll.jpg
  52. wavylinefallingleavesrollpopup.jpg

  53. Step 4
  54. Starting at a top corner of your project area, roll the colored glaze down the length of the surface in a 3’ wide vertical section.
  55. /howto/wavylines_untitled_074popup.jpg
  56. /howto/wavylines_untitled_074.jpg
  57. wavylines_untitled_074popup.jpg

  58. Step 5
  59. While the glaze is still wet, drag a whisk broom from top to bottom over the section. Move it slightly from side to side in a wavy motion. <br /><br /><font face="Frutiger67Condensed">TIP:</font> A dry whisk broom or almost any dry brush (4” or wider) will create a basic wavy line effect. (The softer the brush, the less distinct the pattern will be). On smooth walls, a notched trowel or scarifier will create stronger, bolder patterns.
  60. /howto/untitled_076popup.jpg
  61. /howto/untitled_076.jpg
  62. untitled_076popup.jpg

  63. Step 6
  64. Continue to work in 3’ wide vertical sections. Overlap and blend each section as you go to avoid hard edges. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Always wipe your whisk broom with a cloth rag or a paper towel after each pass. Stand back and preview your work periodically to ensure an even look.
  65. /howto/untitled_092popup.jpg
  66. /howto/untitled_092.jpg
  67. untitled_092popup.jpg

  68. Step 7
  69. Repeat the process until the project is complete.
  70. /howto/wavylinespopup.jpg
  71. /howto/wavylines.jpg
  72. wavylinespopup.jpg

  73. <font face="Frutiger67Condensed"><font face="Frutiger76Italic">Colors Used:</font></font> Base Color: Hawaiian Passion S-G-300, Glaze Color: Falling Leaves S-H-240
  74. Primer Guide

  75. guide
  76. /Marketing/Primer_Guide/main.swf
  77. Brush (2”–2½”)
  78. /equipment/brush_nyl.png
  79. Bucket
  80. /equipment/2galbucket.png
  81. Vinyl Gloves
  82. /equipment/gloves.png
  83. Paint Tray
  84. /equipment/painttray.png
  85. Paint Tray Liner
  86. /equipment/painttryliner.png
  87. Plastic Sheeting
  88. /equipment/plasticsheeting.png
  89. Protective Apparel
  90. /equipment/protapparel.png
  91. Rags
  92. /equipment/rags.png
  93. Roller Cover and Frame
  94. /equipment/minirollerandframe.png
  95. Stir Stick
  96. /equipment/stirsticks.png
  97. Whisk Broom
  98. /equipment/texture_broom.png
  99. PREMIUM PLUS WITH STYLE<font face='Superscript'>®</font> Faux Glaze

  100. PREMIUM PLUS WITH STYLE® Faux Glaze No. 748
  101. /product/748_01_805892rc.png
  102. 1010102000010-I
  103. 1
  104. /Marketing/Page_Images/how_to_page_image_blue.jpg
  105. 0x7D999F
  106. 0xBBCDCA
  107. normal
  108. Blue Background Image

  109. /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
  110. Premium Plus Ultra Interior Paints
  111. PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints

  112. /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
  113. 0x7D999F
  114. 0xBBCDCA
  115. normal
  116. Interior Product Subcategory Background

  117. /Products/product_images/1700_01r_c.png
  118. /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
  119. Premium Plus Interior Paints and Primers
  120. PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers

  121. /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
  122. 0x7D999F
  123. 0xBBCDCA
  124. normal
  125. Interior Product Subcategory Background

  126. /product/1050_01_135992rc.png
  127. Wavy Line Finish

  128. /howto/wavylinesb.jpg
  129. /howto/wavylinesa.jpg
  130. /howto/wavylinesd.jpg
  131. /howto/wavylinesc.jpg
  132. Wavy Line Finish
  133. Explore Paint World

  134. Explore Paintworld<br><br>
  135. /Behr/Products/product_images/paintworld.png
  136. image_swf
  137. /Behr_Common/Paint_World/main.swf
  138. layer
  139. 850.0
  140. 400.0