How to Create a Painted Canvas Finish | Behr PaintFind how to create a painted canvas finish in your home interior with this guide from Behr Paint.how to create a painted canvas finish, painted canvas finish, faux finish, how to create a faux finish, decorative finish, how to create a decorative finish, textured finish, paintworld, primer guideLet the experts at Behr Paints and Faux Finishes show you how to use Premium Plus Interior Texture Paint to create a painted canvas finish on your interior walls. There is no need to be afraid of a project when Behr is there to guide you.Begin your project by transferring PREMIUM PLUS® Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards.
TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.Place a 5-gallon bucket grid into the bucket. Using a roller frame and a looped roller cover, work the roller into the texture paint until it is fully loaded.Starting in a 3’ x 3’ section at a top corner of your project, begin rolling the texture paint in a “W” formation.Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from top to bottom, paint the next 3’ x 3’ section directly below the previous one.
TIP: Texture Paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3' x 3' sections.Repeat the process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes.
TIP: Be sure to allow this first coat to set for 15–20 minutes before starting the painted canvas treatment.To create the painted canvas finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.Using a water dampened sea sponge, lightly wipe the 3' x 3' section in a free-form pattern until you have created a look you like.With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.Using the same free-style technique as before, lightly wipe the dampened sea sponge over the new section. As you go, overlap and blend each section to avoid hard edges.Working in 3’ x 3’ sections, repeat the process of painting, texturing, and blending until the entire surface is covered.To add color, apply a topcoat of PREMIUM PLUS® Interior Paint onto the textured surface using the “W and fill-in” process after the painted canvas finish has cured for 24 hours.
TIP: Applying a topcoat of paint increases the protection of the textured finish.Repeat the process until the project is complete.Color Used: Cracked Wheat 320E-2 (Shown on Smooth Texture Paint)How to Create a Painted Canvas Finish- Learn how to create a painted canvas finish on your walls.
- /howto/paintedcanvas_intro_image.jpg
paintedcanvas_intro_image.jpg- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image- Intermediate DIY'er
- 1
- interior, decorative, texture paint, painted canvas, faux finish, topcoat, technique, sea sponge, free-style, blend, texture paint, specialty paint, project, walls, drywall, plaster, PREMIUM PLUS Texture Paint, Premium Plus Interior Paints and Primers
- /printable/howto/how_to_painted_canvas.pdf
Paint World- Explore Paintworld<br><br>
- /Marketing/paintworld_ico.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 425.0
- Step 1
- Begin your project by transferring PREMIUM PLUS<font face='Superscript'>®</font> Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.
- /howto/paintedcanvas1popup.jpg
- /howto/paintedcanvas1.jpg
paintedcanvas1popup.jpg- Step 2
- Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards. <br /><br /><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off the excess paint against the inside wall of the bucket.
- /howto/paintedcanvas2popup.jpg
- /howto/paintedcanvas2.jpg
paintedcanvas2popup.jpg- Step 3
- Place a 5-gallon bucket grid into the bucket. Using a roller frame and a looped roller cover, work the roller into the texture paint until it is fully loaded.
- /howto/paintedcanvas6popup.jpg
- /howto/paintedcanvas6.jpg
paintedcanvas6popup.jpg- Step 4
- Starting in a 3’ x 3’ section at a top corner of your project, begin rolling the texture paint in a “W” formation.
- /howto/paintedcanvas7popup.jpg
- /howto/paintedcanvas7.jpg
paintedcanvas7popup.jpg- Step 5
- Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from top to bottom, paint the next 3’ x 3’ section directly below the previous one. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Texture Paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3' x 3' sections.
- /howto/paintedcanvas8popup.jpg
- /howto/paintedcanvas8.jpg
paintedcanvas8popup.jpg- Step 6
- Repeat the process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Be sure to allow this first coat to set for 15–20 minutes before starting the painted canvas treatment.
- /howto/paintedcanvas9popup.jpg
- /howto/paintedcanvas9.jpg
paintedcanvas9popup.jpg- Step 7
- To create the painted canvas finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.
- /howto/paintedcanvas35popup.jpg
- /howto/paintedcanvas35.jpg
paintedcanvas35popup.jpg- Step 8
- Using a water dampened sea sponge, lightly wipe the 3' x 3' section in a free-form pattern until you have created a look you like.
- /howto/paintedcanvas36popup.jpg
- /howto/paintedcanvas36.jpg
paintedcanvas36popup.jpg- Step 9
- With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.
- /howto/paintedcanvas37popup.jpg
- /howto/paintedcanvas37.jpg
paintedcanvas37popup.jpg- Step 10
- Using the same free-style technique as before, lightly wipe the dampened sea sponge over the new section. As you go, overlap and blend each section to avoid hard edges.
- /howto/paintedcanvas37_1popup.jpg
- /howto/paintedcanvas37_1.jpg
paintedcanvas37_1popup.jpg- Step 11
- Working in 3’ x 3’ sections, repeat the process of painting, texturing, and blending until the entire surface is covered.
- /howto/paintedcanvas38popup.jpg
- /howto/paintedcanvas38.jpg
paintedcanvas38popup.jpg- Step 12
- To add color, apply a topcoat of PREMIUM PLUS<font face='Superscript'>®</font> Interior Paint onto the textured surface using the “W and fill-in” process after the painted canvas finish has cured for 24 hours. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Applying a topcoat of paint increases the protection of the textured finish.
- /howto/paintedcanvas13popup.jpg
- /howto/paintedcanvas13.jpg
paintedcanvas13popup.jpg- Step 13
- Repeat the process until the project is complete.
- /howto/paintedcanvasfinishpopup.jpg
- /howto/paintedcanvasfinish.jpg
paintedcanvasfinishpopup.jpg- <font face="Frutiger67Condensed"><font face="Frutiger76Italic">Color Used:</font></font> Cracked Wheat 320E-2 (Shown on Smooth Texture Paint)
Primer Guide- guide
- /Marketing/Primer_Guide/main.swf
- Brush (2”–2½”)
- /equipment/brush_nyl.png
- Bucket (5-Gallon)
- /equipment/5galbucket.png
- Bucket Grid
- /equipment/bucketgrid.png
- Drop Cloths
- /equipment/dropcloth_1.png
- Extension Pole
- /equipment/extensionpole.png
- Vinyl Gloves
- /equipment/gloves.png
- Ladder
- /equipment/ladder.png
- Painter’s Tape
- /equipment/painterstape_2.png
- Protective Apparel
- /equipment/protapparel.png
- Rags
- /equipment/rags.png
- Texture Roller Cover
- /equipment/texture_roller.png
- Roller Frame (7”–9”)
- /equipment/roller.png
- Sea Sponge
- /equipment/seasponge.png
- Stir Stick
- /equipment/stirsticks.png
PREMIUM PLUS<font face='Superscript'>®</font> Texture Paint - PREMIUM PLUS® Texture Paint
- /product/559_02_212443c.png
- 1010101000030-I
- 1
- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
- Premium Plus Ultra Interior Paints
PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /Products/product_images/1700_01r_c.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
- Premium Plus Interior Paints and Primers
PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /product/1050_01_135992rc.png
Painted Canvas- /howto/paintedcanvasfinishb.jpg
- /howto/paintedcanvasfinisha.jpg
- /howto/paintedcanvasfinishd.jpg
- /howto/paintedcanvasfinishc.jpg
- Painted Canvas
Explore Paint World- Explore Paintworld<br><br>
- /Behr/Products/product_images/paintworld.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 400.0
|