1. How to Create a Geometric Swirl Finish | Behr Paint

  2. Find how to create a geometric swirl finish in your home interior with this guide from Behr Paint.

  3. how to create a geometric swirl finish, geometric swirl finish, faux finish, how to create a faux finish, decorative finish, how to create a decorative finish, textured finish, paintworld, primer guide

  4. Let the experts at Behr Paints and Faux Finishes show you how to use Premium Plus Interior Texture Paint to create a geometric swirl finish on your interior walls. There is no need to be afraid of a project when Behr is there to guide you.

  5. Begin your project by transferring the PREMIUM PLUS® Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.

  6. Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards.

    TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.

  7. Place a 5-gallon bucket grid into the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.

  8. Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.

  9. Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll into the cut in area as well. Forming columns from top to bottom, work the next 3’ x 3’ section directly below the previous one.

    TIP: Texture Paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3’ x 3’ sections.

  10. Repeat the process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes.

    TIP: Be sure to allow this first coat to set for 15–20 minutes before starting the geometric swirl treatment.

  11. To create the geometric swirl finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.

  12. Using a water dampened sea sponge, lightly pass over the 3’ x 3’ section in a twisting motion until you have created a look you like.

  13. With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.

  14. Using the same twisting motion technique as before, lightly pass the dampened sea sponge over the new section. As you go, overlap and blend each section to avoid hard edges.

  15. Working in 3’ x 3’ sections, repeat the process of painting, texturing, and blending until the entire surface is covered.

  16. To add color, apply a topcoat of PREMIUM PLUS® Interior Paint to the textured surface using the “W and fill-in” process after the geometric swirl finish has cured for 24 hours.

    TIP: Applying a topcoat of paint increases the protection of the textured finish.

  17. Repeat the process until the project is complete.

  18. Color Used: Contemplation 700E-3 (Shown on Smooth Texture Paint)

  19. How to Create a Geometric Swirl Finish

  20. Step-by-step instructions on creating geometric swirls on your walls.
  21. /howto/geometricswirl_intro_image.jpg

  22. geometricswirl_intro_image.jpg

  23. /Marketing/Page_Images/how_to_page_image_blue.jpg
  24. 0x7D999F
  25. 0xBBCDCA
  26. normal

  27. Blue Background Image

  28. Intermediate DIY'er
  29. 1
  30. interior, decorative, texture paint, geometric swirl, faux finish, topcoat, technique, blend, sea sponge, specialty paint, texture paint, project, walls, drywall, plaster, PREMIUM PLUS Texture Paint, Premium Plus Interior Paints and Primers
  31. /printable/howto/how_to_geometric_swirl.pdf

  32. Paint World

  33. Explore Paintworld<br><br>
  34. /Marketing/paintworld_ico.png
  35. image_swf
  36. /Behr_Common/Paint_World/main.swf
  37. layer
  38. 850.0
  39. 425.0
  40. Step 1
  41. Begin your project by transferring the PREMIUM PLUS<font face='Superscript'>®</font> Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.
  42. /howto/geoswirl1popup.jpg
  43. /howto/geoswirl1.jpg

  44. geoswirl1popup.jpg

  45. Step 2
  46. Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards. <br /><br /><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off the excess paint against the inside wall of the bucket.
  47. /howto/geoswirl2popup.jpg
  48. /howto/geoswirl2.jpg

  49. geoswirl2popup.jpg

  50. Step 3
  51. Place a 5-gallon bucket grid into the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.
  52. /howto/geoswirl6popup.jpg
  53. /howto/geoswirl6.jpg

  54. geoswirl6popup.jpg

  55. Step 4
  56. Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.
  57. /howto/geoswirl7popup.jpg
  58. /howto/geoswirl7.jpg

  59. geoswirl7popup.jpg

  60. Step 5
  61. Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll into the cut in area as well. Forming columns from top to bottom, work the next 3’ x 3’ section directly below the previous one. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Texture Paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3’ x 3’ sections.
  62. /howto/geoswirl8popup.jpg
  63. /howto/geoswirl8.jpg

  64. geoswirl8popup.jpg

  65. Step 6
  66. Repeat the process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Be sure to allow this first coat to set for 15–20 minutes before starting the geometric swirl treatment.
  67. /howto/geoswirl9popup.jpg
  68. /howto/geoswirl9.jpg

  69. geoswirl9popup.jpg

  70. Step 7
  71. To create the geometric swirl finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.
  72. /howto/geoswirl23popup.jpg
  73. /howto/geoswirl23.jpg

  74. geoswirl23popup.jpg

  75. Step 8
  76. Using a water dampened sea sponge, lightly pass over the 3’ x 3’ section in a twisting motion until you have created a look you like.
  77. /howto/geoswirl24popup.jpg
  78. /howto/geoswirl24.jpg

  79. geoswirl24popup.jpg

  80. Step 9
  81. With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.
  82. /howto/geoswirl25popup.jpg
  83. /howto/geoswirl25.jpg

  84. geoswirl25popup.jpg

  85. Step 10
  86. Using the same twisting motion technique as before, lightly pass the dampened sea sponge over the new section. As you go, overlap and blend each section to avoid hard edges.
  87. /howto/geoswirl25_1popup.jpg
  88. /howto/geoswirl25_1.jpg

  89. geoswirl25_1popup.jpg

  90. Step 11
  91. Working in 3’ x 3’ sections, repeat the process of painting, texturing, and blending until the entire surface is covered.
  92. /howto/geoswirl26popup.jpg
  93. /howto/geoswirl26.jpg

  94. geoswirl26popup.jpg

  95. Step 12
  96. To add color, apply a topcoat of PREMIUM PLUS<font face='Superscript'>®</font> Interior Paint to the textured surface using the “W and fill-in” process after the geometric swirl finish has cured for 24 hours. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Applying a topcoat of paint increases the protection of the textured finish.
  97. /howto/geoswirl13popup.jpg
  98. /howto/geoswirl13.jpg

  99. geoswirl13popup.jpg

  100. Step 13
  101. Repeat the process until the project is complete.
  102. /howto/geoswirlfinishpopup.jpg
  103. /howto/geoswirlfinish.jpg

  104. geoswirlfinishpopup.jpg

  105. <font face="Frutiger67Condensed"><font face="Frutiger76Italic">Color Used:</font></font> Contemplation 700E-3 (Shown on Smooth Texture Paint)

  106. Primer Guide

  107. guide
  108. /Marketing/Primer_Guide/main.swf
  109. Brush (2”–2½”)
  110. /equipment/brush_nyl.png
  111. Bucket (5-Gallon)
  112. /equipment/5galbucket.png
  113. Bucket Grid
  114. /equipment/bucketgrid.png
  115. Drop Cloths
  116. /equipment/dropcloth_1.png
  117. Extension Pole
  118. /equipment/extensionpole.png
  119. Gloves
  120. /equipment/gloves.png
  121. Ladder
  122. /equipment/ladder.png
  123. Painter’s Tape
  124. /equipment/painterstape_2.png
  125. Protective Apparel
  126. /equipment/protapparel.png
  127. Rags
  128. /equipment/rags.png
  129. Texture Roller Cover
  130. /equipment/texture_roller.png
  131. Roller Frame (7”–9”)
  132. /equipment/roller.png
  133. Sea Sponge
  134. /equipment/seasponge.png
  135. Stir Stick
  136. /equipment/stirsticks.png

  137. PREMIUM PLUS<font face='Superscript'>®</font> Texture Paint

  138. PREMIUM PLUS® Texture Paint
  139. /product/559_02_212443c.png
  140. 1010101000030-I
  141. 1
  142. /Marketing/Page_Images/how_to_page_image_blue.jpg
  143. 0x7D999F
  144. 0xBBCDCA
  145. normal

  146. Blue Background Image

  147. /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
  148. Premium Plus Ultra Interior Paints

  149. PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints

  150. /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
  151. 0x7D999F
  152. 0xBBCDCA
  153. normal

  154. Interior Product Subcategory Background

  155. /Products/product_images/1700_01r_c.png
  156. /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
  157. Premium Plus Interior Paints and Primers

  158. PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers

  159. /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
  160. 0x7D999F
  161. 0xBBCDCA
  162. normal

  163. Interior Product Subcategory Background

  164. /product/1050_01_135992rc.png

  165. Geometric Swirl

  166. /howto/geoswirlfinishb.jpg
  167. /howto/geoswirlfinisha.jpg
  168. /howto/geoswirlfinishd.jpg
  169. /howto/geoswirlfinishc.jpg
  170. Geometric Swirl

  171. Explore Paint World

  172. Explore Paintworld<br><br>
  173. /Behr/Products/product_images/paintworld.png
  174. image_swf
  175. /Behr_Common/Paint_World/main.swf
  176. layer
  177. 850.0
  178. 400.0