How to Create a Grasscloth Finish | Behr PaintFind how to create a grasscloth finish in your home interior with this guide from Behr Paint.how to create a grasscloth finish, grasscloth finish, faux finish, how to create a faux finish, decorative finish, how to create a decorative finish, textured finish, paintworld, primer guideLet the experts at Behr Paints and Faux Finishes show you how to use Premium Plus Interior Texture Paint to create a grasscloth finish on your interior walls. There is no need to be afraid of a project when Behr is there to guide you.Begin your project by transferring PREMIUM PLUS® Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards.
TIP: To avoid drips, tap off the excess paint against the inside wall of the bucket.Place a 5-gallon bucket grid in the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from ceiling to floor, paint the next 3’ x 3’ section directly below the previous one.
TIP: Texture paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3’ x 3' sections.Repeat this process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes.
TIP: Be sure to allow this first coat to set for 15–20 minutes before starting the grasscloth treatment.To create the grasscloth finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.Vertically drag a whisk broom lightly over the length of the 3’x 3’ section until you have created a look you like.With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.Drag the whisk broom over the new section using the same technique as before. As you go, overlap and blend each section to avoid hard edges.Continue this process of painting, texturing, and blending until the entire surface is covered.To add color, apply a topcoat of PREMIUM PLUS® Paint to the textured surface using the “W and fill-in” process after the grasscloth finish has cured for 24 hours.
TIP: Applying a topcoat of paint increases the protection of the textured finish.Repeat the process until the project is complete.Color Used: Bleached Denim 560F-5 (Shown on Sand Texture Paint)How to Create a Grasscloth Finish- Easy steps to creating a grasscloth finish.
- /howto/grasscloth_intro_image.jpg
grasscloth_intro_image.jpg- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image- Intermediate DIY'er
- 1
- interior, decorative, texture paint, grasscloth, faux finish, topcoat, technique, whisk broom, blend, specialty paint, texture paint, project, walls, drywall, plaster, PREMIUM PLUS Texture Paint, Premium Plus Interior Paints and Primers
- /printable/howto/how_to_grasscloth.pdf
Paint World- Explore Paintworld<br><br>
- /Marketing/paintworld_ico.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 425.0
- Step 1
- Begin your project by transferring PREMIUM PLUS<font face='Superscript'>®</font> Interior Texture Paint to a 5-gallon bucket and stirring it thoroughly with a stir stick.
- /howto/grasscloth1popup.jpg
- /howto/grasscloth1.jpg
grasscloth1popup.jpg- Step 2
- Dip a quality 2”–2½” wide nylon/polyester brush into the texture paint in the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at a top corner and continue along the ceiling and around the baseboards. <br /><br /><font face="Frutiger67Condensed">TIP:</font> To avoid drips, tap off the excess paint against the inside wall of the bucket.
- /howto/grasscloth2popup.jpg
- /howto/grasscloth2.jpg
grasscloth2popup.jpg- Step 3
- Place a 5-gallon bucket grid in the bucket. Using a roller frame and a looped roller cover, work the tool into the texture paint until it is fully loaded.
- /howto/grasscloth6popup.jpg
- /howto/grasscloth6.jpg
grasscloth6popup.jpg- Step 4
- Starting in a 3’ x 3’ section at a top corner of your project, roll the texture paint onto the surface in a “W” formation.
- /howto/grasscloth7popup.jpg
- /howto/grasscloth7.jpg
grasscloth7popup.jpg- Step 5
- Work the roller back and forth across the section until the “W” is completely filled in. Be sure to roll over the cut in area as well. Forming a column from ceiling to floor, paint the next 3’ x 3’ section directly below the previous one. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Texture paint has an open working time of approximately 10–15 minutes. To keep the edges wet for blending, be sure to work in small 3’ x 3' sections.
- /howto/grasscloth8popup.jpg
- /howto/grasscloth8.jpg
grasscloth8popup.jpg- Step 6
- Repeat this process of forming columns until the entire working surface is covered. Allow the coat to set for 15–20 minutes. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Be sure to allow this first coat to set for 15–20 minutes before starting the grasscloth treatment.
- /howto/grasscloth9popup.jpg
- /howto/grasscloth9.jpg
grasscloth9popup.jpg- Step 7
- To create the grasscloth finish, return to the top corner of your newly painted textured surface and roll a new coat of texture paint onto a 3’ x 3’ section. Allow it to set for 5 minutes.
- /howto/grasscloth29popup.jpg
- /howto/grasscloth29.jpg
grasscloth29popup.jpg- Step 8
- Vertically drag a whisk broom lightly over the length of the 3’x 3’ section until you have created a look you like.
- /howto/grasscloth30popup.jpg
- /howto/grasscloth30.jpg
grasscloth30popup.jpg- Step 9
- With your roller, paint the next 3’ x 3’ section to the side of the previous one. Form a row. Allow it to set for 5 minutes.
- /howto/grasscloth31popup.jpg
- /howto/grasscloth31.jpg
grasscloth31popup.jpg- Step 10
- Drag the whisk broom over the new section using the same technique as before. As you go, overlap and blend each section to avoid hard edges.
- /howto/grasscloth31_1popup.jpg
- /howto/grasscloth31_1.jpg
grasscloth31_1popup.jpg- Step 11
- Continue this process of painting, texturing, and blending until the entire surface is covered.
- /howto/grasscloth32popup.jpg
- /howto/grasscloth32.jpg
grasscloth32popup- Step 12
- To add color, apply a topcoat of PREMIUM PLUS<font face='Superscript'>®</font> Paint to the textured surface using the “W and fill-in” process after the grasscloth finish has cured for 24 hours. <br /><br /><font face="Frutiger67Condensed">TIP:</font> Applying a topcoat of paint increases the protection of the textured finish.
- /howto/grasscloth13popup.jpg
- /howto/grasscloth13.jpg
grasscloth13popup.jpg- Step 13
- Repeat the process until the project is complete.
- /howto/grassclothfinishpopup.jpg
- /howto/grassclothfinish.jpg
grassclothfinishpopup.jpg- <font face="Frutiger67Condensed"><font face="Frutiger76Italic">Color Used:</font></font> Bleached Denim 560F-5 (Shown on Sand Texture Paint)
Primer Guide- guide
- /Marketing/Primer_Guide/main.swf
- Brush (2”–2½”)
- /equipment/brush_nyl.png
- Bucket (5-Gallon)
- /equipment/5galbucket.png
- Bucket Grid
- /equipment/bucketgrid.png
- Drop Cloths
- /equipment/dropcloth_1.png
- Extension Pole
- /equipment/extensionpole.png
- Vinyl Gloves
- /equipment/gloves.png
- Ladder
- /equipment/ladder.png
- Painter’s Tape
- /equipment/painterstape_2.png
- Protective Apparel
- /equipment/protapparel.png
- Rags
- /equipment/rags.png
- Texture Roller Cover
- /equipment/texture_roller.png
- Roller Frame (7”–9”)
- /equipment/roller.png
- Stir Stick
- /equipment/stirsticks.png
- Whisk Broom
- /equipment/texture_broom.png
PREMIUM PLUS<font face='Superscript'>®</font> Texture Paint - PREMIUM PLUS® Texture Paint
- /product/559_02_212443c.png
- 1010101000030-I
- 1
- /Marketing/Page_Images/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
- Premium Plus Ultra Interior Paints
PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /Products/product_images/1700_01r_c.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
- Premium Plus Interior Paints and Primers
PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background- /product/1050_01_135992rc.png
Grasscloth- /howto/grassclothfinishb.jpg
- /howto/grassclothfinisha.jpg
- /howto/grassclothfinishd.jpg
- /howto/grassclothfinishc.jpg
- Grasscloth
Explore Paint World- Explore Paintworld<br><br>
- /Behr/Products/product_images/paintworld.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 400.0
|