Begin by using a brush that has lightly water-dampened bristles.
Dip the brush into the paint to about one-third of the total length of the bristles.
Remove the brush and dab it on the tray or the inside of the can a few times to remove excess paint. Don't wipe the brush against the rim of the can as the rim will fill with paint, making the opening and closing of the lid messy and difficult.
Repeat this at least twice to make certain the bristles have taken up the proper amount of paint. If the brush is properly loaded, you should be able to move the brush without too many drips.
Remove any lint by lightly pressing painter's tape on the roller cover.
Lightly dampen the roller and remove any excess moisture with a paper towel.
Roll the roller cover into the deep end of the paint tray. Do this several times to cover the entire surface of the roller cover with paint.
Roll off excess paint onto the shallow end of the paint tray.
Repeat these steps several times to ensure the roller cover is entirely saturated with paint. A properly loaded roller should not drip when moved and does not require you to apply force against the surface to transfer the paint to the wall.
How to Load a Brush and Roller
- The right way to load your brush or roller with paint.
- /Behr/Marketing/How_Tos/Brush_in_Pail_292x180.jpg
Loading A Brush
- /Behr/Marketing/Other_Page_Images/Prod_Cat_Detail_Pages/how_to_page_image_blue.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Blue Background Image
- Novice DIY'er
- /Behr/Marketing/How_Tos/Interior_Content/HowToLoad_Brush_Roller.pdf
Paint World
- Explore Paintworld<br><br>
- /Marketing/paintworld_ico.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 425.0
- Load A Brush
- Step 1
- Begin by using a brush that has lightly water-dampened bristles.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_brush1_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_brush1_200x105.jpg
HowTo_brush1.jpg
- Step 2
- Dip the brush into the paint to about one-third of the total length of the bristles.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_brush2_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_brush2_200x105.jpg
HowTo_brush2
- Step 3
- Remove the brush and dab it on the tray or the inside of the can a few times to remove excess paint. Don't wipe the brush against the rim of the can as the rim will fill with paint, making the opening and closing of the lid messy and difficult.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_brush3_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_brush3_200x105.jpg
HowTo_brush3
- Step 4
- Repeat this at least twice to make certain the bristles have taken up the proper amount of paint. If the brush is properly loaded, you should be able to move the brush without too many drips.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_brush4_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_brush4_200x105.jpg
HowTo_brush4
- Load A Roller
- Step 1
- Remove any lint by lightly pressing painter's tape on the roller cover.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_roller1_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_roller1_200x105.jpg
HowTo_roller1
- Step 2
- Lightly dampen the roller and remove any excess moisture with a paper towel.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_roller2_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_roller2_200x105.jpg
HowTo_roller2
- Step 3
- Roll the roller cover into the deep end of the paint tray. Do this several times to cover the entire surface of the roller cover with paint.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_roller3_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_roller3_200x105.jpg
HowTo_roller3
- Step 4
- Roll off excess paint onto the shallow end of the paint tray.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_roller5_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_roller5_200x105.jpg
HowTo_roller4_actual
- Step 5
- Repeat these steps several times to ensure the roller cover is entirely saturated with paint. A properly loaded roller should not drip when moved and does not require you to apply force against the surface to transfer the paint to the wall.<br><br>
- /Behr/Marketing/How_Tos/images/HowTo_roller6_400x275.jpg
- /Behr/Marketing/How_Tos/images/HowTo_roller6_200x105.jpg
HowTo_roller5
- Brush (2”–2½”)
- /equipment/brush_nyl.png
- Bucket
- /equipment/2galbucket.png
- Vinyl Gloves
- /equipment/gloves.png
- Paint Can Opener
- /equipment/paintopener.png
- Paint Tray
- /equipment/painttray.png
- Paint Tray Liner
- /equipment/painttryliner.png
- Painter’s Tape
- /equipment/painterstape_2.png
- Roller Cover
- /equipment/rollercover.png
- Roller Frame
- /equipment/roller.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Interior Paints and Primers/
- Premium Plus Interior Paints and Primers
PREMIUM PLUS<font face='Superscript'>®</font> Interior Paints and Primers
- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background
- /Behr/Marketing/Products/can_cuts/2000_01_C.png
- /Home/Primary Menu/Project Center/Browse Our Products/Interior/Premium Plus Ultra Interior Paints/
- Premium Plus Ultra Interior Paints
PREMIUM PLUS ULTRA<font face='Superscript'>®</font> Interior Paints
- /Marketing/Landing_Pages/Prod_subcat_background_BLUE.jpg
- 0x7D999F
- 0xBBCDCA
- normal
Interior Product Subcategory Background
- /Products/product_images/7700_01r_c.png
Explore Paint World
- Explore Paintworld<br><br>
- /Behr/Products/product_images/paintworld.png
- image_swf
- /Behr_Common/Paint_World/main.swf
- layer
- 850.0
- 400.0