Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR MARQUEE® Interior Matte No. 1450

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 119ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

BEHR MARQUEE® Interior Matte No. 1450

BEHR MARQUEE Stain-Blocking Paint & Primer Interior Matte is our most advanced interior paint – delivering high-performance one-coat coverage with every color in the exclusive MARQUEE Interior One-Coat Color Collection. Expressing yourself with exactly the colors you want has never been easier. The MARQUEE Interior One-Coat Color Collection offers an extensive palette of colors in both classic and contemporary hues. It’s the combination of MARQUEE Interior Paint & Primer and MARQUEE colors that delivers beautiful one-coat colors. Guaranteed.

 

GREENGUARD Certified

Finish
A matte sheen has a flat, low-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Ideal for Every Room
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

Where to Use

Properly prepared coated interior surfaces. Ideal for every room.

Usage Summary

1 HR Dry Time
2 HR
Recoat Time

Up to 400 Sq. Ft.

Coverage per

Gallon

Protect
from Freezing

Soap & Water
Clean-Up

Preparation & Prime

All Surfaces:

  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. Remove mildew stains with a mildew stain remover.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR MARQUEE paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).

Stained Surfaces:

  • Lock in stains with BEHR MARQUEE as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR MARQUEE to a small section.
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
  • If bleeding continues, a longer dry time is needed before topcoating.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Fully saturate roller for best coverage.
  • Untinted ULTRA PURE WHITE® and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish.
  • Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).