Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS® Interior Satin Enamel No. 7050

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 21ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

PREMIUM PLUS® Interior Satin Enamel No. 7050

For a paint that’s as versatile as it is beautiful, choose BEHR PREMIUM PLUS Interior Satin Enamel paint. This rich, all-surface sheen is great for any room in the house, and its pearl-like finish makes it perfect for adding a pop of color to both walls and trim.

 

GREENGUARD Certified

Finish
A satin enamel has a pearl like finish that is easy to clean.
Where to Use
All Interior surfaces; moderate-to high-traffic areas
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

There are currently no featured reviews for PREMIUM PLUS® Interior Satin Enamel No. 7050

Product Usage

For low traffic areas. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms and Ceilings.

Usage Summary

1 HR Dry Time 
2 HR Recoat Time

250-400 Sq. Ft 
Coverage per Gallon

Soap & Water
Clean-Up

Protect
from Freezing

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†

  • Use BEHR PREMIUM PLUS® Paint as a primer over properly prepared coated or uncoated surfaces.
  • For stain-blocking, or over oil-based or glossy surfaces, use a product such as BEHR PREMIUM PLUS All-In-One Primer & Sealer No. 75.
  • For optimal color development, better hide, and to reduce the number of topcoats with deep colors denoted with a dagger (†) on the color chip, apply a custom tinted primer coat of BEHR PREMIUM PLUS Paint.
  • Prime all metal surfaces before painting.

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require additional coats for complete hide.
  • Darker colors may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).