Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

KILZ® KWIK-START®

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 129ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

KILZ® KWIK-START®

KILZ® KWIK-START® primer is a fast drying, latex, primer sealer formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences. When brushed, rolled or sprayed it can be topcoated after one hour with latex or oil-base paint. Not recommended for floors.

Finish
85° = < 20
Where to Use
Interior surfaces including drywall, cured plaster, woodwork, masonry, and brick.
Coverage
300 - 400 Sq. Ft. per Gallon

Latest Featured Reviews

There are currently no featured reviews for KILZ® KWIK-START®

SDSs, Tech Data & Certifications

Available In

Where to Use

Use KILZ KWIK-START primer on interior surfaces, including drywall, cured plaster, woodwork, masonry, and brick. Not for use over glossy surfaces or on floors.

Surface Preparation

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • Fill all gaps with paintable sealant and allow to completely dry prior to coating.
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.
  • Glossy Surfaces: KILZ MAX™, KILZ® PREMIUM and KILZ 2® primers are recommended for use over properly prepared glossy surfaces.
  • Mold & Mildew Covered Surfaces: Wash the area with a mild remover, rinse with water and allow to dry before priming. Note: KILZ® PREMIUM and KILZ 2® primers are recommended for mildew prone surfaces.
  • Masonry, Brick, Stucco and Plaster: KILZ® KWIK START® primer may be used on clean, dry, aged interior masonry surfaces that have cured (dried) at least 90 days. If masonry has cured less than 90 days, use KILZ® PREMIUM,KILZ 2®, or KILZ ODORLESS® primers.

Application

  • Eye protection is recommended.
  • For spray applications, a small amount of water (no more than ½ pint per gallon) may be added.
  • Only apply if surface, air and product temperatures are between 50º – 90ºF (10º – 32ºC).
  • Stir thoroughly before and occasionally during use.
  • Apply using a brush, roller or sprayer.
  • Prime the entire surface to ensure a uniform appearance of the topcoat.
  • Stainblocking: KILZ® KWIK-START® primer is formulated to block minor stains before topcoating; for heavy stains use KILZ MAX, KILZ® PREMIUM, KILZ® ORIGINAL, KILZ COMPLETE® or KILZ ODORLESS® primers.
  • Tinting: May be tinted with up to 2 ounces of universal colorant per gallon.

Dry Time

  • KILZ ORIGINAL primer will dry to touch in 30 minutes and can be recoated or topcoated in one hour with a latex or oil-based paint. Application at lower temperatures, high humidity or poor ventilation will affect dry time.

Clean Up & Disposal

  • Clean equipment and paint spatters with mineral spirits. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).