Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR® Solid Color House & Fence Wood Stain No. 30

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 163ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

BEHR® Solid Color House & Fence Wood Stain No. 30

Get all the best features of oil and latex with BEHR's Solid Color House & Fence Wood Stain. This exterior formula creates a durable film that resists cracking and peeling on your home's vertical surfaces. It's available in more than 1,600 custom and computer-matched colors, and is also great on stucco, brick and cement siding.

 

See Our Selection of Solid Colors.

Finish
Provides a film that is highly resistant to cracking, peeling, blistering, weathering, chalking & erosion.
Where to Use
Smooth or rough sawn exterior vertical wood surfaces such as: Plywood, Fences, Patio Covers, Shingles, Shakes, Siding, Laminates, Barns and Masonry & Stucco Surfaces.
Coverage
1st Coat 200-400 Sq.Ft.; 2nd Coat 250-500 Sq. Ft.

Latest Featured Reviews

ALWAYS ADD TINTING COLORANTS BEFORE USING.

SDSs, Tech Data & Certifications

Where to Use

Recommended for smooth or rough sawn exterior vertical wood surfaces such as: Plywood, Fences, Patio Covers, Shingles, Shakes, Siding, Laminates, Barns and Masonry & Stucco Surfaces. DO NOT USE ON HORIZONTAL SURFACES SUBJECT TO FOOT TRAFFIC. Use BEHR PREMIUM Solid Color Waterproofing Stain & Sealer.

Usage Summary

Must Prep
Before Staining

2 Thin Coats 
Recommended

1st Coat
200-400 Sq. Ft
2nd Coat
250-500 Sq. Ft.

Soap & Water
Clean-Up

Preparation

The following steps and products are recommended for best results.

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus.
  • Rinse thoroughly and allow to dry before coating. On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Application

  • Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
  • No primer needed on most woods. However, Redwood, Cedar, Cypress and other “bleeding” woods contain water soluble extractives which may cause discoloration of white and pastel colors; therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Purpose Primer & Sealer.
  • See label for additional instructions. Intermix multiple containers to ensure color uniformity
  • Apply with a nylon/polyester brush. On rough-sawn or textured wood apply with a 3/4” (19 mm) long nap roller or high quality airless sprayer.
  • For airless spraying use a .015 - .019" tip. Pump Sprayer not recommended. Always back-brush or back-roll during all application methods.
  • Keep a wet edge to reduce lapping and help control color uniformity.
  • Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily.
  • Two coats may be necessary for complete hiding. Apply a thinner second coat after the first coat has thoroughly dried.

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).