Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR PRO™ Pre-Catalyzed Waterborne Epoxy Semi-Gloss No. HP150

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 200ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

BEHR PRO™ Pre-Catalyzed Waterborne Epoxy Semi-Gloss No. HP150

BEHR PRO™ Pre-Catalyzed Waterborne Epoxy Semi-Gloss is a high performance, single-component acrylic epoxy coating designed for interior use in commercial, institutional, and industrial facilities, such as hospitals, schools, and food and beverage processing plants. This coating conforms to USDA regulatory requirements for incidental food-contact materials intended for use on surfaces not in direct contact with food, such as walls and ceilings.

 

GREENGUARD Certified

 

Finish
A semi-gloss paint has a sleek, radiant sheen that resists mildew, moisture and wear.
Where to Use
High-traffic areas in commercial, institutional, and light industrial settings.
Coverage
300 - 400 sq ft per gallon

Latest Featured Reviews

There are currently no featured reviews for BEHR PRO™ Pre-Catalyzed Waterborne Epoxy Semi-Gloss No. HP150

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

SDSs, Tech Data & Certifications

Where to Use

Can be applied to properly prepared and primed interior drywall, wood, metal, architectural plastics, cured plaster and masonry. Not for use on floors.

Surface Preparation

The following steps are recommended for best results.

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust and all other foreign substances. Glossy surfaces must be de-glossed prior to coating.
  • Fill all gaps with a 100% acrylic, siliconized, paintable caulking, and allow to completely dry prior to coating.​

Application

  • Surfaces to be painted must be cleaned, primed with an appropriate primer and ready to accept a finish coat.
  • Prime new drywall with a product such as KILZ® PVA Drywall Primer or BEHR PREMIUM PLU® No. 73 Drywall Primer & Sealer.
  • Use product when the surface and air temperatures are between 50-90°F (10-32°C).
  • Airless Spray: .015" to .021" tip with 60 mesh filter.
  • Roller: Use a high quality 3/8"-1/2" nap roller cover on smooth surfaces or 1/2"-3/4" nap roller cover on semi-rough or porous surfaces.
  • Brush: Use a high quality nylon/polyester brush.
  • Coverage: Up to 400 sq. ft. (37 m2) per gallon depending on the surface texture, porosity and application method.
  • Certain colors may require additional coats for complete hide.
  • DO NOT THIN. Product is formulated for use at package consistency only.
  • Intermix containers of same color and product to ensure color and sheen uniformity.

 

Dry Time

  • Dries to touch in 1hour at 77°F (25°C) and 50% humidity. 
  • Recoat after 2 hours.
  • Longer dry time required in cooler temperatures and in higher humidity.
  • After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Clean Up & Disposal

  • Clean all tools and equipment with soap and water.
  • For disposal of empty containers and unused product, contact your household refuse collection service.
  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

To consult with a Behr Certified Coatings Professional, call BehrPro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).