Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

KILZ® GENERAL PURPOSE Interior

  • bvseo_sdk, java_sdk, bvseo-3.2.0
  • CLOUD, getAggregateRating, 178ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

KILZ® GENERAL PURPOSE Interior

KILZ GENERAL PURPOSE is a fast-drying latex primer and sealer formulated to minimize decorating problems caused by surface texture and porosity differences. It's ready to brush, roll or spray and can be topcoated after one hour with latex or oil-based paint.

Finish
N/A
Where to Use
Interior surfaces including drywall, plaster, woodwork, masonry and brick
Coverage
300 - 400 Sq. Ft. per Gallon

Latest Featured Reviews

There are currently no featured reviews for KILZ® GENERAL PURPOSE Interior

Tools & Resources

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

SDSs, Tech Data & Certifications

Available In

Where to Use

Use on almost all exterior surfaces including stucco, wood, masonry and brick. Not recommended for flooring, glossy surfaces, mold & mildew prone surfaces or for stainblocking.

Preparation

  • Complete all patching, repairs and sanding before applying KILZ GENERAL PURPOSE EXTERIOR.
  • The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew, etc. If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • For maximum adhesion, scrape off loose paint and sand to a smooth surface. KILZ PREMIUM and KILZ 2 are recommended for use over properly prepared glossy surfaces.
  • Wash the area with a mildew remover, rinse with water and allow to dry before priming. Note: KILZ PREMIUM and KILZ 2 are recommended for mildew-prone surfaces.
  • KILZ GENERAL PURPOSE EXTERIOR may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ GENERAL PURPOSE EXTERIOR.

Application

  • Eye protection is recommended.
  • A small amount of water may be added for spray applications.
  • Stir or mix thoroughly before and occasionally during use.
  • Apply using a brush, roller or sprayer.
  • KILZ GENERAL PURPOSE EXTERIOR can be topcoated with latex or oil-based paint after one hour.
  • Apply only if surface, air and product temperatures are between 50°-90°F.
  • Prime the entire surface to ensure a uniform appearance.
  • May be tinted with up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than the topcoat is recommended.
  • Coverage varies with porosity. Coverage is approximately 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.

Dry Time

  • Dries to the touch in 30 minutes.
  • Can be recoated or topcoated in one hour with latex or oil-based paint.
  • Application at lower temperatures, in high humidity or in poorly ventilated areas can significantly increase dry and recoat times.

Clean Up & Disposal

  • Clean equipment and paint spatters with warm, soapy water.
  • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • To recycle or properly dispose of paint or primer in your community, call 1-800-CLEANUP.

To consult with a KILZ Certified Coatings Professional, call 1-866-PRIMER-1 (U.S.A. only).