Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

BEHR PRO™ e600 Exterior Semi-Gloss No. PR670

BEHR PRO™ e600 Exterior Semi-Gloss No. PR670

BEHR PRO e600 Exterior Semi-Gloss Paint is specifically designed to meet the expectations of professional painters. Developed for optimal brush and sprayability, this 100% acrylic formula provides excellent hiding power and a uniform, mildew resistant finish.

A Semi-gloss paint sheen is a sleek, radiant sheen that creates a hard, durable finish.
Where to Use
Ideal for both commercial and residential properties.
250 - 400 Sq Ft. per Gallon

Latest Featured Reviews

There are currently no featured reviews for BEHR PRO™ e600 Exterior Semi-Gloss No. PR670

Tools & Resources

Where to Use

Ideal for both commercial and residential properties over properly prepared surfaces such as Stucco, Masonry, Concrete, Concrete Block or Brick as well as Primed Wood or Metal Surfaces. Not for use on floors.

Surface Preparation

  • All surfaces must be clean, free of dust, chalk, oil, grease, mold and mildew stains, loose and peeling paint, rust and all other foreign substances. Glossy surfaces must be 'scuff sanded' with an appropriate sandpaper and primed prior to coating.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Fill all gaps with a 100% acrylic, siliconized, paintable caulking and allow to completely dry prior to coating.


  • Painted surfaces must be cleaned, primed with an appropriate primer and ready to accept a finish coat.
  • Use product when surface and air temperature are between 35-90°F (2-32°C).
  • Airless Spray: .015"-.021" tip with 60 mesh filter.
  • Roller: Use a high quality 3/8"-3/4" nap roller, depending on surface texture
  • Brush:Use a high quality Nylon/Polyester brush
  • Coverage: 250-400 Sq. Ft. per Gallon depending on surface texture, porosity and application method.
  • Certain colors may require additional coats for complete hide.
  • DO NOT THIN. Product is formulated for use at package consistency.
  • Intermix containers of same product to ensure color and sheen uniformity.
  • Do not paint if rain, snow or heavy dew is expected within 24 hours.
  • Vinyl siding - paint color must be same color or lighter than existing vinyl to minimize potential warping.

Dry Time

  • Dries to touch in 2 hours @ 77ºF (25ºC) and 50% Relative Humidity.
  • Recoat after 4 hours.
  • Darker colors, cooler temperatures or higher humidity may prolong drying time.
  • After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Clean-Up & Disposal

  • Clean all tools and equipment with soap and water.
  • For disposal of empty containers and unused product, contact your household refuse collection service.
  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

To consult with a Behr Certified Coatings Professional, call BehrPro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).