Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

MARQUEE® Stain-Blocking Paint and Primer Ceiling Paint No. 1458

MARQUEE® Stain-Blocking Paint and Primer Ceiling Paint No. 1458

For advanced performance and stain-blocking on all of your home's ceilings, choose BEHR PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint.  Its flat sheen hides minor surface imperfections, and can be tinted to light colors.

 

Finish
A ceiling flat with a gloss level of <3 at 60° and sheen of <3 at 85°
Where to Use
Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.
Coverage
Up to 400 Sq. Ft. per Gallon

Latest Featured Reviews

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR ®..

START NOW »

Tools & Resources

SDSs, Tech Data & Certifications

Available In

Where to Use

Properly prepared coated and uncoated Interior Ceilings.  For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Usage Summary

1 Hr Dry Time
2 HR Recoat Time

Up to 400 Sq. Ft 
Coverage per Gal.

Soap & Water
Clean-Up

Protect
from Freezing

Preparation

  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. 
  • Remove mildew stains with a mildew stain remover. 
  • Scuff sand glossy surfaces and repair imperfections. 
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting. 
  • Darker colors may require additional dry time between coats. ​

Prime

  • Use MARQUEE Paint as a primer for properly prepared uncoated, glossy, porous or repaired ceilings. 

STAINED SURFACES:

  • Lock in water stains with MARQUEE Ceiling Paint as a spot primer. 
  • For heavy stains, test for stain bleed-through by applying MARQUEE Ceiling Paint to a small section. 
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating. 
  • If bleeding continues, a longer dry time is needed before topcoating.

 

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally.   
  • Intermix containers of same product to ensure color and sheen uniformity.   
  • Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter). 
  • Popcorn style acoustic ceilings; use acoustic ceiling roller cover (1/2-3/4" nap) or airless sprayer (.015-.019" spray tip, 60 mesh filter). 
  • Allow new stucco, plaster and masonry to cure for 30 days before painting. 
  • Darker colors may require additional dry time between coats. 
  • Cooler temperatures or higher humidity may prolong drying time.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).