Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Site will log you out


You are leaving the BEHR® Consumer website. You will be logged out.



Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

BEHR ULTRA™ SCUFF DEFENSE™ Interior Flat No. 1720

BEHR ULTRA™ SCUFF DEFENSE™ Interior Flat No. 1720

BEHR ULTRA™ SCUFF DEFENSE™ Stain-Blocking Paint & Primer in One sets a new standard for flat paint durability. SCUFF DEFENSE features breakthrough innovation to deliver a rich flat finish that is truly durable enough for high-traffic areas. Don't settle or compromise between the flat look you desire and higher level of durability you require.

 

BEHR ULTRA SCUFF DEFENSE is available in limited stores. Click Here to find out if SCUFF DEFENSE is available in a Home Depot® nearest you.

 

Finish
Flat Finish with Scuff Resistance of a Gloss
Where to Use
Ideal for busy high traffic areas, family rooms, dining rooms, bedrooms and ceilings
Coverage
250-400 Sq. Ft.

Latest Featured Reviews

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR ®..

START NOW »

Tools & Resources

Find a Rep

Enter your Zip/Postal Code to find the nearest Home Depot

Where to Use

Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.

Usage Summary

1 HR Dry Time
2 HR Recoat Time

250-400 Sq. Ft.
Coverage per Gallon

Soap & Water
Clean Up

Protect
from Freezing

Preparation & Prime

  • All surfaces should be properly prepared and cleaned
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry
  • Remove mildew stains with a mildew stain removing product
  • Scuff sand glossy surfaces and repair imperfections
  • Remove all dust with a damp cloth, allow to dry
  • Allow new stucco, plaster and masonry to cure for 30 days before painting
  • Use BEHR ULTRA SCUFF DEFENSE as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with BEHR ULTRA SCUFF DEFENSE Paint as a spot primer.  
  • For heavy stains, test for stain bleed-through by applying BEHR ULTRA SCUFF DEFENSE Paint to a small section. If stain bleeds through, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before topcoating.
  • For drastic color changes or when applying deep colors denoted with a dagger on the color chip, apply a tinted primer coat of BEHR ULTRA SCUFF DEFENSE Paint if needed

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32° C)
  • Stir paint occasionally
  • Intermix containers of same product to ensure color and sheen uniformity
  • Use a high quality 3/8-1/2 nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter)
  • Do not thin if user a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon
  • Certain colors may required additional coats for complete hide
  • Darker colors may require additional dry time between coats
  • Cooler temperatures or higher humidity may prolong drying time
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent
  • Dry paint film is mildew resistant
  • Do not use on floors

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call Behr Pro Hotline Toll Free number at 1-877-776-3961 (U.S.A. only).