How To Apply BEHR PREMIUM® Protector and Waterproofer

Protect your surfaces from corrosion, spalling, efflorescence and freeze-thaw damage with our premium waterproofer.

For Best Results:

Make sure your surface is cleaned and prepped before applying the waterproofer. 
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers 

For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone

For coated concrete: refer to: Preparation of Coated Concrete for Sealers

Step 1

After the surface is cleaned and prepped, apply the BEHR PREMIUM® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer.

Step 2

Remove any puddles by spreading product to drier areas or by wiping off excess with a clean cloth.

Step 3

On vertical surfaces, apply the waterproofer from the bottom up and saturate thoroughly.

Step 4

Once dried, rough, vertical surface may be coated with an oil or latex-based paint or primer. DO NOT paint horizontal surfaces after applying this product.

Clean up with soap and water.

Suggested Tools & Supplies
  • Broom (Stiff Bristle)
  • Rags
  • Scrub Brush
  • Protective Apparel
  • Hose
  • Chemical Resistant Gloves
  • High Pressure Nozzle

  • Mop
More How-tos
Additional Resources
Paint and Stain Calculator

Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.

Calculate
Ask an Expert

Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand. 

Get Expert Help
Color Studio

So many colors and so many ideas: Visit Behr’s Color Studio for inspiration, color tools, design advice and everything you need to find your project’s perfect color.

COLOR STUDIO