BEHR ULTRA^® Exterior Paints

Paint, prime and protect with BEHR ULTRA Exterior

Buy Now

Features

Stain-Blocking Paint and Primer^◊
Excellent Durability & Hide in Fewer Coats
Stain & Dirt Resistant
Low Temperature Application
Enhanced Mildew Resistant Finish
Guards against Damage from Sunlight & Moisture

^◊A primer coat may be needed on some surfaces. See label for details.

Why Choose BEHR ULTRA Exterior Paint?

Because you get it all: Versatile paint and primer^◊ in a single coating that provides excellent durability and resistance to stains and mildew. It’s never been easier to transform and protect your home.

^◊A primer coat may be needed on some surfaces. See back label for details.

Excellent Durability

The tighter, denser paint film guards against damage from sunlight and moisture.

Stain & Dirt Resistant

Formulated to resist both dirt and water, preventing stains from settling into the paint film.

Low Temperature Application

A tough paint film protects from the elements and can be applied in cold climates as low as 35°F.

AVAILABLE SHEENS

Choose from 3 sheens

1 gal can of Behr Ultra Exterior paint, flat

BEHR ULTRA^® Exterior Flat

Avg. Rating:

Learn More

1 gal can of Behr Ultra Exterior paint, satin enamel

BEHR ULTRA^® Exterior Satin Enamel

Avg. Rating:

Learn More

1 gal can of Behr Ultra Exterior paint, semi-gloss

BEHR ULTRA^® Exterior Semi-Gloss Enamel

Avg. Rating:

Learn More

PRODUCT USAGE AND APPLICATION INSTRUCTIONS
PRODUCT USAGE

1 HR Dry Time
2 HR Recoat Time

250-400 Sq. Ft
Coverage per Gallon

Soap & Water
Clean-Up

Protect
from Freezing
Where to Use
Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

Preparation & Prime†

Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.

Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.

Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.

Scuff sand or etch metals. Rinse and allow to dry.

Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.

Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.

Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.

For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.

Read More

Application

Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.

Do not paint when rain or heavy condensation is expected.

Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.

On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).

On rough surfaces, use a high quality 3/4-1” nap roller cover.

Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.

Certain colors may require more than one coat for complete hide.

On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.

After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Dry paint film is mildew resistant.

When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

Read More

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Visit behr.com for painting tips, expert project advice and the perfect color coordination with ColorSmart by BEHR^®.

empty-paragraph

Read More
Read More
SDS & DATA SHEET

SDS & DATA SHEET

BEHR ULTRA^® Exterior Flat

Ultra Pure White No. 4850 Medium Base No. 4854 Deep Base No. 4853
See Full SDS, Product Data & Safety

See Full SDS, Product Data & Safety

SDS & DATA SHEET

BEHR ULTRA^® Exterior Satin Enamel

Ultra Pure White No. 9850 Medium Base No. 9854 Deep Base No. 9853
See Full SDS, Product Data & Safety

See Full SDS, Product Data & Safety

SDS & DATA SHEET

BEHR ULTRA^® Exterior Semi-Gloss Enamel

Ultra Pure White No. 5850 Medium Base No. 5854 Deep Base No. 5853
See Full SDS, Product Data & Safety

See Full SDS, Product Data & Safety
WARRANTY

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

PRODUCT USAGE AND APPLICATION INSTRUCTIONS
SDS & DATA SHEET
WARRANTY

PRODUCT USAGE

1 HR Dry Time
2 HR Recoat Time
250-400 Sq. Ft
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use

Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

Preparation & Prime†

Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
Scuff sand or etch metals. Rinse and allow to dry.
Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.
For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.

Application

Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
Do not paint when rain or heavy condensation is expected.
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).
On rough surfaces, use a high quality 3/4-1” nap roller cover.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Certain colors may require more than one coat for complete hide.
On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Visit behr.com for painting tips, expert project advice and the perfect color coordination with ColorSmart by BEHR^®.

empty-paragraph

BEHR ULTRA^® Exterior Flat

Ultra Pure White No. 4850 Medium Base No. 4854 Deep Base No. 4853

See Full SDS, Product Data & Safety

SDS & DATA SHEET

BEHR ULTRA^® Exterior Satin Enamel

Ultra Pure White No. 9850 Medium Base No. 9854 Deep Base No. 9853

See Full SDS, Product Data & Safety

SDS & DATA SHEET

BEHR ULTRA^® Exterior Semi-Gloss Enamel

Ultra Pure White No. 5850 Medium Base No. 5854 Deep Base No. 5853

See Full SDS, Product Data & Safety

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

STARTING PRICE
DURABILITY
STAIN BLOCKING
COVERAGE

BEHR PREMIUM PLUS^®
Learn More

$XX.XX

Durable, Long-Lasting Finish

Helps resist moisture, fading and stains

250 - 400 sq. ft. per gallon
BEHR ULTRA^®
Learn More

$XX.XX

Excellent Durability

Stain & dirt resistance

250 - 400 sq. ft. per gallon
BEHR MARQUEE^®
Learn More

$XX.XX

Excellent Durability

Exceptional resistance to dirt & fading

250 - 400 sq. ft. per gallon
BEHR DYNASTY^®
Learn More

$XX.XX

Exceptional Durability

Rain Resistant in 60 minutes, Fast Drying - 4 Hr. Block Resistance, Low Temperature Application

250 - 400 sq. ft. per gallon

*Valid only when tinted to colors from the BEHR DYNASTY® specially curated Exterior Color Fade Protection Palette. Based on predictive lab testing with a color shift less than Delta E of 5 as measured by CieLAB. A primer coat may be needed. Two coats of BEHR DYNASTY® Exterior Paint are recommended for optimal durability. Individual results may vary. See back label instructions for details and warranty limitations.