Shopping Cart is Full
You cannot add any additional items to the Shopping Cart
Close Window
Site will log you out

You are leaving the BEHR® Consumer website. You will be logged out.

Ask an Expert by Email

Thank you,
Your email has been sent to our experts.

See all Products »

BEHR PREMIUM® Concrete & Masonry Bonding Primer

BEHR PREMIUM® Concrete & Masonry Bonding Primer

For a long-lasting durable finish, use BEHR PREMIUM Concrete & Masonry Bonding Primer. This high-performance water-based primer will promote a uniform topcoat finish and create a stronger adhesion between the coating and surface. It is easy to apply and dries clear.

Where to Use
Use on uncoated Interior or Exterior surfaces such as: Concrete, Masonry and any Porous Stone or Brick.
350-500 Sq. Ft. per Gallon

Latest Featured Reviews


Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

MSDS & Data Sheet

Where to Use

Use on uncoated Interior or Exterior surfaces such as: Concrete, Masonry and any Porous Stone or Brick. Not designed for use on wood, metal or silicone treated surfaces. Do not use on coated surfaces. Use only on porous surfaces. NOTE: SOME SURFACES MAY APPEAR SLIGHTLY DARKER AFTER PRODUCT DRIES.

Usage Summary

350-500 Sq. Ft
Coverage per Gallon

2 HR Dry Time 
4 HR Ready for Topcoat

Commercial Brush Cleaner

from Freezing


The following steps are required

  • New concrete must cure for a minimum of 30 days prior to priming.
  • Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove any loose or peeling paint.
  • Do not apply over previously coated surfaces.
  • To completely strip previous coatings, use concrete & masonry paint stripper product.
  • For proper penetration and adhesion of primer, use a concrete & masonry cleaner & etcher product.


  • DO NOT THIN. Stir primer thoroughly before and occasionally during application.
  • Use product when air and surface temperatures are between 50-90°F (10-32°C).
  • Apply using a high quality pump sprayer, 1/4" - 3/8" nap roller, nylon/polyester brush or a pad applicator.

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity
  • Must apply a topcoat after at least 4 hours, but before 30 days.


  • Do not use soap and water to clean brushes or other applicators as they will become gummy.
  • Properly dispose of all soiled rags.
  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like