CUSTOMIZE & BUY
Tahitian sky
S480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot

BEHR PREMIUM® Wet-Look Sealer

Avg. Rating:
false

Beautify, protect and preserve the natural beauty of all your home's concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Wet-Look Sealer. This high-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains. 


Finish

High-Gloss

Best for use in

Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior concrete and masonry surfaces.

Coverage

200-450 Sq. Ft per Gallon


202263927
no-variant-pdp
PRODUCT USAGE
Concrete square feet coverage icon

Spread Rate
200-450 Sq. Ft

Clock icon

1 HR Dry Time 
4 HR Recoat Time

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

  • Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior surfaces such as: Pavers, Concrete, Mexican Tile and Unglazed Tiles, Brick, Aggregate, Natural and Artificial Stone, Masonry and Stucco.
  • Not recommended for use on Wood, Metal, Granite, Marble, Terrazzo, areas immediately adjacent to pools or areas subject to hydrostatic pressure. Do not use over Oil-Based products.

CAUTION: Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Apply in sections so wet material does not have to be walked on during application.

Read More

  • New concrete must cure for a minimum of 30 days.
  • For new or smooth concrete, use a concrete & masonry cleaner & etcher product.
  • Clean previously created surfaces in sound condition with a concrete & masonry degreaser & cleaner product.
  • Stamped concrete requires the use of a cleaner to remove release agent prior to sealing.
  • Scrape and remove loose and peeling coating. To strip the surface, use a concrete & masonry paint stripper product.
Read More

  • DO NOT THIN. Stir or shake before applying.
  • Use product when temperature is between 50-80°F (10-27°C). Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected within 24 hours.
  • Apply a thin coat using a nylon/polyester brush, 1/4” - 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq. ft. (19-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll for uniform thickness.
  • Additional coats (no more than 4) may be added for a higher gloss and added protection.

Note: Horizontal surfaces may be subject to excessive wear. Therefore, periodic touch-ups may be necessary.

Read More

  • Longer dry time required in cooler temperatures and higher humidity.
  • Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days.
  • Clean with a mild, non-abrasive liquid detergent after 30 days.
Read More

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused paint, contact your household refuse collection service.
Read More

Reviews

BEHR PREMIUM® Wet-Look Sealer is rated 2.7 out of 5 by 84.
Rated 1 out of 5 by from AWFUL. Milky, no “Wet” look. Wish I’d read reviews Bought this product at the recommendation of a Home Depot employee. 3 jugs will now be going back to the store, including the partial one we tested on a 10x10 portion of our stamped concrete patio. The product turned milky white as it was being applied before our very eyes. Only a thin coat was applied and rolled out for evenness and to get into cracks/texture of stamping. ZERO WET LOOK even in the areas that didn’t get milky, looked exactly as it does dry. When unsealed concrete next to it actually gets wet it is much much darker and looks very nice. This is the look we were told this sealer would have. We acted fast and power washed the sealant off so that our brand new patio wasn’t ruined. The sight of it was a stab to the chest after spending so much money to put in a new stamped concrete slab. No way we are using this on the other 500sf. SAVE YOUR TIME, MONEY, AND HEARTACHE. Horrible product. Washed it all off, as much as we could. Off to research a high quality sealer! Don’t buy this product, good luck.
Date published: 2020-05-23
Rated 2 out of 5 by from no change i purchased a few weeks ago for my patio paver, my experience was just the opposite, i dont see any change whatsoever, cleaned well, followed the instructions, did i get a bad batch? no wet look at all,
Date published: 2020-05-08
Rated 4 out of 5 by from Behr Wet look What is the heat rating for this? Looking to use on outdoor concrete countertop
Date published: 2020-05-05
Rated 1 out of 5 by from Milky white patches We have a pavered pool deck. We cleaned and washed the pavers. We waited 4 days, allowing ample drying time. We used a roller to apply the sealer. We applied approximately 1 gallon per 200 sq ft as recommended. Our paver deck is ruined. It’s blotchy white all over. I’m sick over the sight of our deck. This product is horrible. Behr needs to stop making this product.
Date published: 2020-04-29
Rated 1 out of 5 by from Hard Pass--find something else!!! I used this product to seal my recently dyed concrete basement flooring. I followed instructions and decided to use a roller. My sprayer did not have a "dial", so I could not determine the recommended spray setting and painting by hand was too tedious. I applied the sealer using the correct roller and applied one thin coat. I allowed it to dry overnight. I was so sad to see visible white, milky lines where my roller had overlapped on each segment. You can literally see my rolling pattern through these white lines (it is like this in my entire room!). I immediately went to the Behr website, read feedback provided by Behr to customers who experienced the same problem. Behr suggested adding a second coat to help "dry" any moisture that may have been trapped (it had been less than 72 hours since I applied the first coat). I tested it on a small area, and there is absolutely no change in appearance. Another Behr rep suggested wiping the milky patches with water on a rag. I did that too, absolutely no improvement. It is really upsetting to expend all this time, effort, and money just to have your floors ruined on this final step. Please, do yourself a favor and find a different sealer.
Date published: 2020-04-19
Rated 1 out of 5 by from Milky Finish Never thought to check reviews when getting this at home depot..... Now what?
Date published: 2020-04-19
Rated 1 out of 5 by from Terrible Product I used this product according to instructions (rolled). The result was milky white. My walkway looks terrible now and I wasted my money and time. Based on my experience and all the terrible reviews BEHR should stop making this product
Date published: 2020-04-01
Rated 1 out of 5 by from Worst sealer ever!!!! I bought this sealer this week for a concrete floor we resurfaced with an overlay and an acid stain. We neutralized the stain and cleaned the floors very well and let dry until extremely dry. This is the third time we have resurfaced a floor with this method in our home, and the first time we used this sealer. we applied the sealer with a roller according to the directions and when it dried, it had a milky appearance just like other reviewers mentioned. We applied a thin second coat, that the customer service representatives mentioned and it did not help at all. This seller RUINED the appearance of the floor and wasted the time and money that we put into this project. DO NOT BUY!!! Like I mentioned previously, this the first time we used this sealer, because it was cheaper. Spend more and buy a quality product, NOT THIS ONE!
Date published: 2019-11-28
Rated 4 out of 5 by from Very good I bought a few months ago. Easy to apply , nice wet look. Brought back the rich colors of the pavers. Keep up the good work Behr....
Date published: 2019-09-05
Rated 4 out of 5 by from Easy Applied 2 costs to my very neglected pavers. Brought them back to life.
Date published: 2019-09-05
Rated 1 out of 5 by from Waste of Money I purchased this product to redo my pavers at poolside. Worst product in the world. I had a professional power wash, clean and spray on this product. After applying two coats of spraying (9 Gallon) did not see any good results. He followed directions as instructed on container. Contacted Behr and complained about product. They said I should of had the product rolled on and that the spraying did not apply enough of the product. They sent me free of charge 8 gallon to roll on. Had the contractor apply another two coats of product, which was and additional charge. Same result did not see any improvement. I spent alot of money on the contractor and the original 9 gallons purchased to do this project and all I got was a milky spotty finish. I would not recommend this product, it is a waste of alot of money. VERY DISSATISFIED WITH THE END RESULTS.
Date published: 2019-08-13
Rated 5 out of 5 by from Fantastic product I had painted my basement concrete floor and spread the sprinkles over it. I needed a product to put over the sprinkles to keep them from coming up when swept. I found this water-based product and applied it over the floor surface with a lamb's wool pad. It worked like a charm. I applied several coats to increase the protection and the shine. I love this product and would highly recommend it.
Date published: 2019-08-08
Rated 3 out of 5 by from Good product It is very important to put a thin layer at a time abs watch out for streaks
Date published: 2019-08-08
Rated 3 out of 5 by from Took 3 coats I purchased this product to freshen up my existing sealer and seal some new polymeric sand joints . It did well on the freshen up part. It absolutely did not seal the new joints where water runs off roof to pavers below. Even after application of 3 coats and soaking it in. 9 days after it was applied. 90 percent of the sand was washed out. If you have gutters on your project it may last better. Where water doesn’t splash directly on it, it works well
Date published: 2019-08-08
Rated 3 out of 5 by from Was expecting better. I had used other brands with success and chose the behr high gloss because I expected a similar wet look. Very disappointed in the results. It was at best below average results.
Date published: 2019-08-07
Rated 1 out of 5 by from Not happy at all. Have fairly new stamped concrete. I waited for a while before sealing just to let the concrete weather a bit. Had professional painters (who have done this before) apply it believing process would go smooth. Well finished product did not look like what the patio looked like before. One section came out fine but my other sections had a lot of light/dark contrast, and worst of all areas where it looked like a paint like substance had been spilled or blotted. I’m hoping with time this will weather away ...hoping!!! Just spent several thousand on this patio, and wanted that nice fished look...now I wish I would have left it.
Date published: 2019-07-30
Rated 5 out of 5 by from Great Product! I Placed This Behr Wet Look Sealer Product Down On My Driveway Back In May. I Applied It Over The Behr Paint & Stain Products, Man Did It Make It Pop!
Date published: 2019-06-30
Rated 4 out of 5 by from Easy easy to apply Music on my basement floor over concrete stain looks like it did a great job
Date published: 2019-06-28
Rated 1 out of 5 by from Run away from this one Terrible finish with the same white milky swirls everyone else is talking about. This product is not cheap and I will NEVER use BEHR again!! Twice now I have had issues Once with a refinish deck product and now this Thanks BEHR NOT!!!
Date published: 2019-05-29
Rated 1 out of 5 by from NO GOOD WASTE OF TIME AND MONEY. CLEANED STAMPED CONCRETE SLAD MADE SURE TO FOLLW ALL DIRECTIONS ON CAN, SPRAYED AND LIGHT ROLLED TURNED MILKEY WHITE NOW NEED TO STRIP AND START OVER, HOPE IT WILL NOT DAMAGE COLOR OF STAMPED CONCRETE PRODUCT IS NO GOOD....
Date published: 2019-05-28
Rated 2 out of 5 by from Need to remove it - Help I followed all directions and have used the product on 3 driveways (brick pavers). Not really the result I was looking for. It does give a "sheen" but doesn't od much for the wet look. It doesn't have any milky or white spots, but even after curing, tire marks are all over the pavers. I need to now remove it. Since it is a water based product, can you give me the steps to remove it using a stripper and power washer? I used a 3100 psi power washer. Will that be enough?
Date published: 2019-05-27
Rated 1 out of 5 by from Milky white Put 4 coats on driveway, per instructions and now have a big mess on my hands. 50% of the job turned milky white and looks terrible. Have used Behr paint products for years and have been very pleased with product up to now.
Date published: 2019-04-23
Rated 4 out of 5 by from Quick and Easy to Apply I used Behr Premium Wet-Look Sealer to give our driveway and porch stairs a good seal before Winter. I applied the sealer to broomed concrete and exposed aggregate. It was applied with a roller (brush for the edges). I was happy with the results, but was hoping the wet-look would give the aggregate a "new" appearance. The sealer adds a sheen only, however, not a renewed, darker appearance.
Date published: 2018-12-04
Rated 4 out of 5 by from good sealer pretty good sealer but would work best on a patio that's covered
Date published: 2018-12-02
Rated 4 out of 5 by from Good, but do it right This looks great in the backyard! However if it’s too thick when you put it on it will cave cloudy upon drying. Key is to do several thin layers using a paint roller. While the spray is faster, it leaves too much behind. If you must use a sprayer, then use a roller afterwards to thin it out! Have a cleanup rag handy too for crevices the roller cant get to.
Date published: 2018-12-02
Rated 4 out of 5 by from Wet Look Sealer I had a 24' x 30' garage built this last summer in June 2018. The floor has a 4" thick layer of cement. In August I applied 3 layers of Behr wet look sealant. Drying time between coats was 2-3 days. We went away on vacation and after returning, waited a total time of 15 days before driving any vehicle into the garage. I really liked the method used and ease of applying the coatings to the floor. However, what I am finding is that the tires from my cars are leaving permanent tread marks, rusty brown in color, in the coating. So now I have several tread markings in the floor near all the tires depending on where I park each vehicle? I was pretty confident that the floor was completely dried before use. Do you have any idea why this is happening, it does not look like it is reversible without possibly sanding each stain location back down to bare cement? Any help regarding this issue would be greatly appreciated.
Date published: 2018-11-28
Rated 1 out of 5 by from Terrible Product We applied this according to instructions and like so many others, our pavers dried to a dull milky white finish. I wouldn't normally post a negative review, except I went to the website to try to chat with someone, and got a message that due to high volume, no one was available to help me. Now I am on the hunt for a good paver stripper so we can start over. I will not attempt to apply a thin second layer like the Behr people are recommending to other with this issue.
Date published: 2018-07-24
Rated 1 out of 5 by from MILKY LOOK I followed the Low Luster product instructions exactly. My husband and I worked together and Sprayed it on and followed by back rolling. I applied it on a sunny 70 Deg day. It dropped to mid 50's thru the night. The next day I have a milky white finish. I called the 800 Behr number on the product and the customer service rep was very nice but told me I had 2 options. 1) Apply a 2nd coat in a small area to release the sealer and turn clear. 2) Apply a stripper (not sure what is a water solvent stripper) I don't know which option to go with. I read all of the reviews and it sounds like many people have had this same issue many times but I want to know how they fixed it. You can see in the picture half of the pavers with the sealer that looks grey and half without sealer
Date published: 2018-05-24
Rated 1 out of 5 by from only rated 1 star because cannot rate "0" I used per directions on stone around pool. The stone does NOT have a wet look. It is shiny but has a white looking glaze with the stone looking DULLER than before. Had to use a pressure washer to get it removed and used a different commercial product that was perfect. This product is terrible.
Date published: 2018-05-15
Rated 5 out of 5 by from Good Results -- So far, so good We have between 4,000 to 5,000 square feet of 13-year-old stamped concrete including driveway, walkways & back patio. We had sealed it once before with another produce about 7 or 8 years ago. Was starting to get pretty shabby looking and losing its luster and color and even starting to chip in spots. Thought we'd take a chance at sealing it again and try Behr Wet Look Sealer. Purchased 15 gallons. The product appeared milky (almost lavender). We applied the product using rollers in about 78 to 80 degree weather. I used 2 coats following the instructions, and it came out beautifully. When we got to the back patio, I got creative and added a couple teaspoons of burnt umber tint and mixed well. Applied 2 coats as I did the driveway, and I was pleasantly surprised at the subtle color this added to the mostly grey stamped patio. It's now been about 3 to 4 weeks since we finished the project. The weather here in Sparks, NV can change drastically, It went from snow and cold to over 100 degrees. Also, a couple rain storms. Our concrete looks beautiful. Just don't know how long the product will last. Hoping for the best. Thanks for a great product that was fairly simple to apply!
Date published: 2017-06-28
  • y_2021, m_7, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_3, bvpage2n
  • co_hasreviews, tv_0, tr_84
  • loc_en_US, sid_1015009600030-I, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 89ms
  • REVIEWS, PRODUCT
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.